Command Groups
sntp-server timezone
This command sets the time zone for the access point’s internal clock.
Syntax
hours is the number of hours before/after UTC. Range: ‐12 to +12 hours
Default Setting
None
Command Mode
Global Configuration
Command Usage
This command sets the local time zone relative to the Coordinated Universal Time (UTC, formerly Greenwich Mean Time or GMT), based on the earth’s prime meridian, zero degrees longitude. To display a time corresponding to your local time, you must indicate the number of hours and minutes your time zone is east (before) or west (after) of UTC.
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout
RoamAbout 3000(config)#
show sntp
This command displays the current time and configuration settings for the SNTP client.
Command Mode
Exec
Example
RoamAbout 3000#show sntp
SNTP Information
=========================================================
Service State | : Enabled | |
SNTP (server 1) IP | : 10.1.0.19 | |
SNTP (server 2) IP | : 192.43.244.18 | |
Current Time | : 08 | : 04, Jun 20th, 2003 |
Time Zone | : +8 | (TAIPEI, BEIJING) |
Daylight Saving | : Enabled, from Jun, 1st to Sep, 1st | |
=========================================================
RoamAbout 3000#
RoamAbout Access Point 3000 Configuration Guide
