Enterasys Networks 9033900-04 - page 191

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-65
Default Setting
Alltrapsenabled
Command Mode
GlobalConfiguration
Command Usage
Thiscommandisusedinconjunctionwiththesnmp‐serverhostandsnmp‐serverenable
servercommandstoenableSNMPnotifications.
Example
radiusServerChanged The access point switched from the primary RADIUS server
to the secondary, or from the secondary to the primary
sysSystemDown The access point is about to shutdown and reboot
sysSystemUp The access point is up and running.
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#snmp-server trap dot11StationAssociation
RoamAbout 3000(config)#
Table A-10 SNMP Trap Messages (continued)
Message Description