
Command Groups
untagged-vlanid
This command sets the VLAN ID that the AP maps to untagged packets entering through the APʹs Ethernet port.
Syntax
<id> is the VLANID to use for untagged packets. Range: 1 to 4095
Default Setting
1
Command Mode
Interface Ethernet
Example
RoamAbout 3000#
RoamAbout 3000#configure
Enter configuration commands, one per line. End with
CTRL/Z
RRoamAbout 3000(config)#interface ethernet
Enter Ethernet configuration commands, one per line.
RoamAbout
RoamAbout