Command Groups

Command Groups

The AP 3000 commands fall into the functional command groups shown in Table A‐3.

Table A-3 Command Groups

Command Group	Description	Page

General	Basic commands for entering configuration mode, restarting	A-10
	the system, or quitting the CLI

System Management	Controls user name, password, system logs, browser
	management options, clock settings, and a variety of other	A-16
	system information

PPPoE	Configures PPPoE management tunnel connection	A-45
	parameters for the Ethernet port.

SNMP	Configures community access strings and trap managers	A-57

Flash/File	Manages code image or access point configuration files	A-76

RADIUS	Configures the RADIUS client used with 802.1x	A-81
	authentication	A-81
	authentication

Authentication	Configures IEEE 802.1x port access control and address	A-88
	filtering	A-88
	filtering

Filtering	Filters communications between wireless clients, controls
	access to the management interface from wireless clients,	A-101
	and filters traffic using specific Ethernet protocol types

Interface	Configures connection parameters for the Ethernet port and	A-106
	wireless interface

IAPP	Enables roaming between multi-vendor access points	A-153

QoS	Allows you to select specific network traffic, prioritize it, and	A-154
	use congestion-management and congestion-avoidance
	techniques to provide preferential treatment.

VLANs	Configures VLAN membership	A-170

The access mode shown in the following tables is indicated by the following abbreviations:

•Exec (Executive mode)

•GC (Global Configuration)

•IC (Interface Configuration ‐ general)

•IC‐E (Interface Configuration ‐ configure Ethernet interface)

•IC‐W (Interface Configuration ‐ configure wireless interface)

•IC‐W: VAP (Interface Configuration ‐ configure the selected VAP for an interface)

RoamAbout Access Point 3000 Configuration Guide A-9