Enterasys Networks 9033900-04 manual Pppoe service-name, Pppoe restart

Command Groups

pppoe service-name

This command sets the service name for the PPPoE tunnel.

Syntax

pppoe service-name <string>

string is the service name assigned by the service provider. Range: 1‐63 alphanumeric characters

Default Setting

None

Command Mode

Interface Configuration (Ethernet)

Command Usage

The service name is normally optional, but may be required by some service providers.

Example

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z

RoamAbout 3000(config)#interface ethernet

Enter Ethernet configuration commands, one per line.

RoamAbout 3000(if-ethernet)#pppoe service-name classA

RoamAbout 3000(if-ethernet)#

pppoe restart

This command restarts the PPPoE connection with updated parameters.

Command Mode

Interface Configuration (Ethernet)

Command Usage

This command restarts PPPoE service using the most recently configured parameters.

Example

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z

RoamAbout 3000(config)#interface ethernet

Enter Ethernet configuration commands, one per line.

RoamAbout 3000(if-ethernet)#pppoe restart

RoamAbout 3000(if-ethernet)#

RoamAbout Access Point 3000 Configuration Guide A-55