Enterasys Networks 9033900-04 manual Shutdown, Following example disables the Ethernet port

Command Groups

shutdown

This command disables the Ethernet interface. To restart a disabled interface, use the no form.

Syntax

shutdown no shutdown

Default Setting

Interface enabled

Command Mode

Interface Configuration (Ethernet)

Command Usage

This command allows you to disable the Ethernet port due to abnormal behavior

(e.g., excessive collisions), and re‐enable it after the problem has been resolved. You may also want to disable the Ethernet port for security reasons.

Example

The following example disables the Ethernet port.

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z

RoamAbout 3000(config)#interface ethernet

Enter Ethernet configuration commands, one per line.

RoamAbout 3000(if-ethernet)#shutdown

RoamAbout 3000(if-ethernet)#

A-122