Status Information
The AP System Configuration table displays the following basic system configuration settings:
•System Up Time is the length of time the management agent had been up.
•MAC Address is the physical layer address for the device.
•System Name is the name assigned to this system.
•System Contact is the administrator responsible for the system.
•IP Address is the IP address of the management interface for this device.
•IP default gateway is the IP address of the gateway router between this device and management stations that exist on other network segments.
•HTTP Server displays enabled if management access via HTTP is enabled on the access point.
•HTTP Server Port displays the UDP port number used for a secure HTTP connection to the access point’s Web interface.
•HTTPS Server displays enabled if secure HTTP server is enabled on the access point.
•HTTPS Server Port displays the TCP port used by the HTTPS interface.
•Version displays the version number for the runtime code.
The AP Wireless Configuration table displays the wireless interface settings listed below.
•802.1x displays if IEEE 802.1x access control for wireless clients is enabled.
•SSID is the service set identifier for the wireless group.
•Channel is the radio channel through which the access point communicates with wireless clients.
•Encryption displays enabled or disabled.
•Authentication Type displays if open system or shared key authentication is used.
RoamAbout Access Point 3000 Configuration Guide
