Enterasys Networks 9033900-04 manual Unicast-cipher

Command Groups

Example

The following example shows setting the multi‐cast cipher for the default interface and a VAP.

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z

RoamAbout 3000(config)#interface wireless a

RoamAbout 3000(if-wireless a)#multicast-cipher TKIP

RoamAbout 3000(if-wireless a)#vap 5

RoamAbout 3000(if-wireless a: VAP[5])#multicast-cipher AES

RoamAbout 3000(if-wireless a: VAP[5])#end

RoamAbout 3000(if-wireless a)#

unicast-cipher

This command defines the cipher algorithm used for communicating over a network between the access point and a client.

Syntax

unicast-cipher<AES TKIP WEP>

•AES ‐ Advanced Encryption Standard

•TKIP ‐ Temporal Key Integrity Protocol

•WEP ‐ Wired Equivalent Privacy

Default Setting

WEP

Command Mode

Interface Configuration (Wireless)

Example

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z

RoamAbout 3000(config)#interface wireless g

RoamAbout 3000(if-wireless g)#unicast-cipher TKIP

RoamAbout 3000(if-wireless g)#

A-144