Command Groups
ip ssh-server
Use this command to enable SSH access to this access point. Use the no version of this command to disable SSH access.
Syntax
ip
Default Setting
Enable
Command Mode
Global Configuration
Command Usage
The SSH protocol uses generated public keys to encrypt all data transfers passing between the access point and SSH‐enabled management station clients and ensures that data traveling over the network arrives unaltered.
Note: After boot up, the SSH server requires approximately two minutes to generate host encryption keys. The SSH server is disabled while the keys are being generated.
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#ip
RoamAbout 3000(config)#
Related Commands
ip ssh‐server port page A‐29
