Command Groups
snmp-server trap
This command enables the access point to send specific SNMP traps (i.e., notifications). Use the no form to disable specific trap messages.
Syntax
trap is one of the SNMP trap messages listed in Table A‐10:
Table A-10 SNMP Trap Messages
Message | Description | |
|
| |
dot11InterfaceAFail | The 802.11a interface failed | |
|
| |
dot11InterfaceGFail | The 802.11g interface failed | |
|
| |
dot11StationAssociation | A client station successfully associated with the access point | |
|
| |
dot11StationAuthentication | A client station was successfully authenticated | |
|
| |
dot11StationReAssociation | A client station was successfully | |
access point | ||
| ||
|
| |
dot11StationRequestFail | A client station failed association, | |
authentication | ||
| ||
|
| |
dot1xAuthFail | A 802.1x client station failed RADIUS authentication | |
|
| |
dot1xAuthNotInitiated | A client station did not initiate 802.1x authentication | |
|
| |
dot1xAuthSuccess | A 802.1x client station was successfully authenticated by the | |
RADIUS server | ||
| ||
|
| |
dot1xMacAddrAuthFai | A client station failed MAC address authentication with the | |
RADIUS server | ||
| ||
|
| |
dot1xMacAddrAuthSuccess | A client station successfully authenticated its MAC address | |
with the RADIUS server | ||
| ||
|
| |
iappContextDataSent | A client station’s Context Data was sent to another access | |
point with which the station has associated | ||
| ||
|
| |
iappStationRoamedFrom | A client station roamed from another access point (identified | |
by its IP address) | ||
| ||
|
| |
iappStationRoamedTo | A client station roamed to another access point (identified by | |
its IP address) | ||
| ||
|
| |
localMacAddrAuthFail | A client station failed authentication with the local MAC | |
address database on the access point | ||
| ||
|
| |
localMacAddrAuthSuccess | A client station was successfully authenticated its MAC | |
address with the local database on the access point | ||
| ||
|
| |
pppLogonFail | The access point failed to log onto the PPPoE server using | |
the configured user name and password | ||
| ||
|
| |
sntpServerFail | The access point failed to set the time from the configured | |
| SNTP server | |
|
|
