Enterasys Networks 9033900-04 manual Advanced Configuration Menu Description, Radius

Overview

Table 4-1 Advanced Configuration

Menu	Description	Page
Identification	Specifies the system name, location and contact.	4-3
TCP / IP Settings	Enables DHCP, or allows you to configures the IP address, subnet	4-5
	mask, gateway, and domain name servers.
RADIUS	Configures the RADIUS server for wireless client authentication.	4-9
PPPoE Setup	Configures the access point to support Point-to-Point Protocol over	4-12
	Ethernet (PPPoE) for WAN connection to an ISP.
Authentication	Configures the access point as an 802.1x authentication supplicant	4-14
	with the network.
Filter Control	Filters communications between wireless clients, access to the	4-17
	management interface from wireless clients, and traffic matching
	specific Ethernet protocol types.
QoS	Allows you to select specific network traffic, prioritize it, and use	4-22
	congestion-management and congestion-avoidance techniques to
	provide preferential treatment.
CDP Settings	Configures AP to use Cabletron Discovery Protocol (CDP)	4-26
Rogue AP Detection	This feature scans the airwaves and collects information about	4-29
	access points in the area.
SNMP	Controls access to this access point from management stations	4-31
	using SNMP, as well as the hosts that will receive trap messages.
Administration	Configures user name and password for management access;	4-37
	upgrades software from local file, FTP or TFTP server; resets
	configuration settings to factory defaults; and resets the access
	point.
System Log	Controls logging of error messages; sets the system clock via	4-45
	SNTP server or manual configuration.
802.11a Interface	Configures the IEEE 802.11a interface.	4-47
Radio Settings	Configures radio signal parameters, and service set parameters for	4-47
	the default interface and up to seven Virtual Access Points (VAPs).
Security	Configures 802.1x client authentication, with an option for MAC	4-60
	address authentication, and data encryption with Wired Equivalent
	Protection (WEP) or Wi-Fi Protected Access (WPA).
802.11b/g Interface	Configures the IEEE 802.11b/g interface.	4-47
Radio Settings	Configures radio signal parameters, and service set parameters for	4-47
	the default interface and up to seven Virtual Access Points (VAPs).
Security	Configures 802.1x client authentication, with an option for MAC	4-60
	address authentication, and data encryption with Wired Equivalent
	Protection (WEP) or Wi-Fi Protected Access (WPA).
Status	Displays AP status, CDP status, station status, Neighbor AP	4-77
	Detection status, and event logs.

4-2 Advanced Configuration