Command Groups
show snmp target
This command displays the SNMP v3 notification target settings.
Command Mode
Exec
Example
RoamAbout 3000#show snmp target
Host ID | : dave |
User | : dave |
IP Address | : 192.168.1.10 |
UDP Port | : 162 |
=============================
Host ID | : steve |
User | : steve |
IP Address | : 192.168.1.12 |
UDP Port | : 162 |
=============================
RoamAbout 3000#
show snmp filter
This command displays SNMP notification filters.
Command Mode
Exec
Example
RoamAbout 3000#show snmp filter
Filter: 8
Type: exclude Subtree: .10.33.4.3.4
Mask: None
=============================
Filter: 7
Type: include Subtree: .10.7.4.5.1
Mask: None
=============================
RoamAbout 3000#
RoamAbout Access Point 3000 Configuration Guide
