User’s Guide for the WG602 v3 54 Mbps Wireless Access Point

Make sure the cable connectors are securely plugged in at the access point and the network device (hub, switch, or router).

Make sure the connected device is turned on.

Be sure the correct cable is used. Use a standard Category 5 Ethernet patch cable. If the network device has Auto Uplink™ (MDI/MDIX) ports, you may use a cross-over cable. See the Reference Manual for a full explanation of cable types.

The Wireless LAN activity light is not lit.

The access point’s antenna is not working.

If the Wireless LAN activity light stays off, disconnect the adapter from its power source and then plug it in again.

Make sure the antenna is tightly connected to the WG602 v3.

Contact NETGEAR if the Wireless LAN light remains off.

I cannot configure the wireless access point from a browser.

Check these items:

The WG602 v3 is properly installed, LAN connections are OK, and it is powered on. Check that the LAN port LED is amber or green to verify that the Ethernet connection is OK.

If you are using the NetBIOS name of the WG602 v3 to connect, ensure that your PC and the WG602 v3 are on the same network segment or that there is a WINS server on your network.

If your PC uses a Fixed (Static) IP address, ensure that it is using an IP Address in the range of the WG602 v3. The WG602 v3 default IP Address is 192.168.0.227 and the default Subnet Mask is 255.255.255.0. If you are not sure about these settings, follow the instructions for “Installing the 54 Mbps Wireless Access Point WG602 v3” on page 3-4.

I cannot access the Internet or the LAN with a wireless capable computer.

There is a configuration problem. Check these items:

You may not have restarted the computer with the wireless adapter to have TCP/IP changes take effect. Restart the computer.

6-2

Troubleshooting

202-10060-01, September 2004

Page 56
Image 56
NETGEAR WG602NA manual Wireless LAN activity light is not lit, Cannot configure the wireless access point from a browser

WG602NA specifications

The NETGEAR WG602NA is a wireless access point that has garnered attention for its robust performance and reliability in various networking environments. Designed primarily for home and small office use, this device offers users an efficient way to expand their network's coverage, providing both flexibility and convenience in connectivity.

One of the standout features of the WG602NA is its adherence to the IEEE 802.11g standard, which allows it to deliver wireless connectivity speeds of up to 54 Mbps. This speed makes it suitable for a variety of online activities, including web browsing, streaming videos, and online gaming. The device also supports backward compatibility with 802.11b devices, ensuring that older devices can still connect seamlessly.

The WG602NA utilizes advanced wireless security protocols to protect users' data. It supports Wired Equivalent Privacy (WEP) for basic encryption, as well as Wi-Fi Protected Access (WPA and WPA2) for more robust security measures. This ensures that your network remains secure from unauthorized access and data breaches.

In terms of connectivity, the WG602NA offers a straightforward setup process that is user-friendly, even for those with minimal technological knowledge. The device features a simple web interface that guides users through the configuration process, allowing them to customize settings according to their needs. It also includes a variety of options for network configuration, such as DHCP and static IP addressing, which can accommodate different network setups.

For those looking to set up multiple access points, the WG602NA can be configured to operate in bridge mode, enabling seamless roaming across larger areas without losing connectivity. This feature is particularly beneficial in larger homes or office settings where consistent signal strength is essential.

The compact design of the WG602NA makes it an unobtrusive addition to any setting, and it is equipped with a power over Ethernet (PoE) option, allowing it to be powered through an Ethernet cable. This flexibility facilitates easier installations as there is no need for searching for an electrical outlet nearby.

Overall, the NETGEAR WG602NA is a reliable access point that combines speed, security, and ease of use. Its features make it an excellent choice for individuals or small businesses seeking to enhance their wireless network capabilities, ensuring consistent and secure connectivity for all connected devices.