User’s Guide for the WG602 v3 54 Mbps Wireless Access Point

•So that hosts recognize local IP broadcast packets

When a device broadcasts to its segment neighbors, it uses a destination address of the local network address with all ones for the host address. In order for this scheme to work, all devices on the segment must agree on which bits comprise the host address.

•So that a local router or bridge recognizes which addresses are local and which are remote

Private IP Addresses

If your local network is isolated from the Internet (for example, when using NAT), you can assign any IP addresses to the hosts without problems. However, the IANA has reserved the following three blocks of IP addresses specifically for private networks:

10.0.0.0- 10.255.255.255

172.16.0.0- 172.31.255.255

192.168.0.0 - 192.168.255.255

Choose your private network number from this range. The DHCP server of the WG602 v3 Access Point is preconfigured to automatically assign private addresses.

Regardless of your particular situation, do not create an arbitrary IP address; always follow the guidelines explained here. For more information about address assignment, refer to RFC 1597, Address Allocation for Private Internets, and RFC 1466, Guidelines for Management of IP Address Space. The Internet Engineering Task Force (IETF) publishes RFCs on its Web site at www.ietf.org.

Single IP Address Operation Using NAT

In the past, if multiple PCs on a LAN needed to access the Internet simultaneously, you had to obtain a range of IP addresses from the ISP. This type of Internet account is more costly than a single-address account typically used by a single user with a modem, rather than a router. The WG602 v3 Access Point employs an address-sharing method called Network Address Translation (NAT). This method allows several networked PCs to share an Internet account using only a single IP address, which may be statically or dynamically assigned by your ISP.

The router accomplishes this address sharing by translating the internal LAN IP addresses to a single address that is globally unique on the Internet. The internal LAN IP addresses can be either private addresses or registered addresses. For more information about IP address translation, refer to RFC 1631, The IP Network Address Translator (NAT).

Network, Routing, Firewall, and Cabling Basics

C-7

202-10060-01, September 2004

Page 84 Page 86
Page 85
Image 85
NETGEAR WG602NA manual Private IP Addresses, Single IP Address Operation Using NAT
Page 84 Page 86

WG602NA specifications

The NETGEAR WG602NA is a wireless access point that has garnered attention for its robust performance and reliability in various networking environments. Designed primarily for home and small office use, this device offers users an efficient way to expand their network's coverage, providing both flexibility and convenience in connectivity.

One of the standout features of the WG602NA is its adherence to the IEEE 802.11g standard, which allows it to deliver wireless connectivity speeds of up to 54 Mbps. This speed makes it suitable for a variety of online activities, including web browsing, streaming videos, and online gaming. The device also supports backward compatibility with 802.11b devices, ensuring that older devices can still connect seamlessly.

The WG602NA utilizes advanced wireless security protocols to protect users' data. It supports Wired Equivalent Privacy (WEP) for basic encryption, as well as Wi-Fi Protected Access (WPA and WPA2) for more robust security measures. This ensures that your network remains secure from unauthorized access and data breaches.

In terms of connectivity, the WG602NA offers a straightforward setup process that is user-friendly, even for those with minimal technological knowledge. The device features a simple web interface that guides users through the configuration process, allowing them to customize settings according to their needs. It also includes a variety of options for network configuration, such as DHCP and static IP addressing, which can accommodate different network setups.

For those looking to set up multiple access points, the WG602NA can be configured to operate in bridge mode, enabling seamless roaming across larger areas without losing connectivity. This feature is particularly beneficial in larger homes or office settings where consistent signal strength is essential.

The compact design of the WG602NA makes it an unobtrusive addition to any setting, and it is equipped with a power over Ethernet (PoE) option, allowing it to be powered through an Ethernet cable. This flexibility facilitates easier installations as there is no need for searching for an electrical outlet nearby.

Overall, the NETGEAR WG602NA is a reliable access point that combines speed, security, and ease of use. Its features make it an excellent choice for individuals or small businesses seeking to enhance their wireless network capabilities, ensuring consistent and secure connectivity for all connected devices.
Top Page Image Contents