User’s Guide for the WG602 v3 54 Mbps Wireless Access Point

Ad Hoc Mode (Peer-to-Peer Workgroup)

In an ad hoc network, computers are brought together as needed; thus, there is no structure or fixed points to the network - each node can generally communicate with any other node. There is no access point involved in this configuration. This mode enables you to quickly set up a small wireless workgroup and allows workgroup members to exchange data or share printers as supported by Microsoft networking in the various Windows operating systems. Some vendors also refer to ad hoc networking as peer-to-peer group networking.

In this configuration, network packets are directly sent and received by the intended transmitting and receiving stations. As long as the stations are within range of one another, this is the easiest and least expensive way to set up a wireless network.

Network Name: Extended Service Set Identification (ESSID)

The Extended Service Set Identification (ESSID) is one of two types of Service Set Identification (SSID). In an ad hoc wireless network with no access points, the Basic Service Set Identification (BSSID) is used. In an infrastructure wireless network that includes an access point, the ESSID is used, but may still be referred to as SSID.

An SSID is a thirty-two character (maximum) alphanumeric key identifying the name of the wireless local area network. Some vendors refer to the SSID as network name. For the wireless devices in a network to communicate with each other, all devices must be configured with the same SSID.

Wireless Channels

IEEE 802.11g/b wireless nodes communicate with each other using radio frequency signals in the ISM (Industrial, Scientific, and Medical) band between 2.4 GHz and 2.5 GHz. Neighboring channels are 5 MHz apart. However, due to spread spectrum effect of the signals, a node sending signals using a particular channel will utilize frequency spectrum 12.5 MHz above and below the center channel frequency. As a result, two separate wireless networks using neighboring channels (for example, channel 1 and channel 2) in the same general vicinity will interfere with each other. Applying two channels that allow the maximum channel separation will decrease the amount of channel cross-talk, and provide a noticeable performance increase over networks with minimal channel separation.

B-2

Wireless Networking Basics

202-10060-01, September 2004

Page 62
Image 62
NETGEAR WG602NA manual Ad Hoc Mode Peer-to-Peer Workgroup, Network Name Extended Service Set Identification Essid

WG602NA specifications

The NETGEAR WG602NA is a wireless access point that has garnered attention for its robust performance and reliability in various networking environments. Designed primarily for home and small office use, this device offers users an efficient way to expand their network's coverage, providing both flexibility and convenience in connectivity.

One of the standout features of the WG602NA is its adherence to the IEEE 802.11g standard, which allows it to deliver wireless connectivity speeds of up to 54 Mbps. This speed makes it suitable for a variety of online activities, including web browsing, streaming videos, and online gaming. The device also supports backward compatibility with 802.11b devices, ensuring that older devices can still connect seamlessly.

The WG602NA utilizes advanced wireless security protocols to protect users' data. It supports Wired Equivalent Privacy (WEP) for basic encryption, as well as Wi-Fi Protected Access (WPA and WPA2) for more robust security measures. This ensures that your network remains secure from unauthorized access and data breaches.

In terms of connectivity, the WG602NA offers a straightforward setup process that is user-friendly, even for those with minimal technological knowledge. The device features a simple web interface that guides users through the configuration process, allowing them to customize settings according to their needs. It also includes a variety of options for network configuration, such as DHCP and static IP addressing, which can accommodate different network setups.

For those looking to set up multiple access points, the WG602NA can be configured to operate in bridge mode, enabling seamless roaming across larger areas without losing connectivity. This feature is particularly beneficial in larger homes or office settings where consistent signal strength is essential.

The compact design of the WG602NA makes it an unobtrusive addition to any setting, and it is equipped with a power over Ethernet (PoE) option, allowing it to be powered through an Ethernet cable. This flexibility facilitates easier installations as there is no need for searching for an electrical outlet nearby.

Overall, the NETGEAR WG602NA is a reliable access point that combines speed, security, and ease of use. Its features make it an excellent choice for individuals or small businesses seeking to enhance their wireless network capabilities, ensuring consistent and secure connectivity for all connected devices.