User’s Guide for the WG602 v3 54 Mbps Wireless Access Point

Note: You must set the Regulatory Domain. It may not be legal to operate the wireless access point in a region other than one of those identified in this field.

Now that you have finished the setup steps, you are ready to deploy the WG602 v3 in your network. If needed, you can now reconfigure the PC you used in step 1 back to its original TCP/IP settings.

3DEPLOY THE WG602 V3 ACCESS POINT

a.Disconnect the WG602 v3 and position it where you will deploy it. The best location is elevated at the center of your wireless coverage area.

b.Lift the antenna side so that it is vertical.

c.Connect an Ethernet cable from your WG602 v3 Access Point to a LAN port on your router, switch, or hub.

Note: By default, WG602 v3 is set to be a DHCP client. If your network uses static IP addresses, you will need to change this setting.

d.Connect the power adapter to the wireless access point and plug the power adapter in to a power outlet. The power, LAN, and wireless lights and should light up.

4VERIFY WIRELESS CONNECTIVITY

Using a computer with an 802.11b or 802.11g wireless adapter with the correct wireless settings needed to connect to the WG602 v3 (SSID, MAC ACL, WEP, WPA, etc.), verify connectivity by using a browser such as Netscape or Internet Explorer to browse the Internet, or check for file and printer access on your network. If you cannot connect, see “Troubleshooting” on page 6-1.

Two Ways to Log In to the WG602 v3

The 54 Mbps Wireless Access Point WG602 v3 can be configured remotely from Microsoft Internet Explorer browser version 5.0 or above, or Netscape Navigator Web browser version 4.78 or above. You can log in to the WG602 v3 in these two ways:

Using the Default IP Address of the WG602 v3 is the most reliable.

Using the NetBIOS name of the WG602 v3 is not as reliable as using the IP Address. The procedures for these two ways of logging in to the WG602 v3 are presented here.

Basic Installation and Configuration

3-6

202-10060-01, September 2004

Page 29
Image 29
NETGEAR WG602NA manual Two Ways to Log In to the WG602, Deploy the WG602 V3 Access Point

WG602NA specifications

The NETGEAR WG602NA is a wireless access point that has garnered attention for its robust performance and reliability in various networking environments. Designed primarily for home and small office use, this device offers users an efficient way to expand their network's coverage, providing both flexibility and convenience in connectivity.

One of the standout features of the WG602NA is its adherence to the IEEE 802.11g standard, which allows it to deliver wireless connectivity speeds of up to 54 Mbps. This speed makes it suitable for a variety of online activities, including web browsing, streaming videos, and online gaming. The device also supports backward compatibility with 802.11b devices, ensuring that older devices can still connect seamlessly.

The WG602NA utilizes advanced wireless security protocols to protect users' data. It supports Wired Equivalent Privacy (WEP) for basic encryption, as well as Wi-Fi Protected Access (WPA and WPA2) for more robust security measures. This ensures that your network remains secure from unauthorized access and data breaches.

In terms of connectivity, the WG602NA offers a straightforward setup process that is user-friendly, even for those with minimal technological knowledge. The device features a simple web interface that guides users through the configuration process, allowing them to customize settings according to their needs. It also includes a variety of options for network configuration, such as DHCP and static IP addressing, which can accommodate different network setups.

For those looking to set up multiple access points, the WG602NA can be configured to operate in bridge mode, enabling seamless roaming across larger areas without losing connectivity. This feature is particularly beneficial in larger homes or office settings where consistent signal strength is essential.

The compact design of the WG602NA makes it an unobtrusive addition to any setting, and it is equipped with a power over Ethernet (PoE) option, allowing it to be powered through an Ethernet cable. This flexibility facilitates easier installations as there is no need for searching for an electrical outlet nearby.

Overall, the NETGEAR WG602NA is a reliable access point that combines speed, security, and ease of use. Its features make it an excellent choice for individuals or small businesses seeking to enhance their wireless network capabilities, ensuring consistent and secure connectivity for all connected devices.