Panasonic KX-TVP200E Opening Your Mailbox Mailbox Log, Press * , then enter your mailbox number

Opening Your Mailbox (Mailbox Log in)

Call VPS

*+ Mailbox No. Password + #

Subscriber's

Main Command Menu

If you just want to record a message in someone else’s mailbox, you do not have to use this procedure.

See the following topic in Chapter 4.

•Recording Messages (for any caller)

•Recording Messages (from a rotary phone)

If your company is using a Panasonic KX-TD series tele- phone system, you can directly access your mailbox just by dialing the number of the V.M. Service, depending upon Sys- tem Programming. Check with your System Manager.

Tip

Step 1 —

If no ports are assigned to Voice Mail Service, press

#6 after calling the

VPS.

To access Subscriber Services, you must open your mailbox first. Follow the operation below.

1 Dial an extension number which is connected to the Voice Mail Service.

Good morning/Good afternoon/Good evening Welcome to the Voice Processing System.

If the system is equipped with multiple lan- guages (up to three languages), you will hear a selection prompt as follows.

(ex.)

For English, press [7].

For French, press [8].

For Chinese, press [9].

2 If you hear the above prompt, press the number of the appropriate language.

Please enter your party’s mailbox number. To enter by name, press [#] and [1].

If you are using a rotary telephone, stay on the line.

To call the operator, press [0].

3 Press * , then enter your mailbox number.

Enter your password, followed by [#].

4 Enter the password if you have one.

You are now in the main command menu.

Using Your Mailbox and the VPS

1-2