3.After entering the login name, press the [EXECUTE/YES] key.
The display now shows the screen for entering a password, where the leftmost digit flashes initially.
SETUP
flashing
4.Enter a password in the same manner as entering a password.
You can enter up to eight characters for a password.
5.After entering the password, press the [EXECUTE/YES] key.
The display now shows "LoginName01 ?".
Ether mode setting
To activate the communication function of the Model 8360, you must set the ether mode to "ON".
<Note>
The settings previously described become effective when the ether mode is set to "ON".
1.Use the JOG dial to bring up "EtherMode?" and press the [EXECUTE/YES] key.
The current setting (ON or OFF) flashes (the default is "OFF").
SETUP
flashing
SETUP
flashing
2.Use the JOG dial to select "ON" and press the [EXECUTE/YES] key.
The display returns to show "EtherMode?".
8
