Fostex 8360 owner manual Introduction, Installing the ether card, FTP client applications

Models: 8360

1 12
Download 12 pages 46.85 Kb
Page 2
Image 2

Introduction

Thank you very much for purchasing the Fostex product.

The Model 8360 is an ether card dedicated for the D2424/D2424LV digital multitrack recorder.

By installing the 8360 to the recorder, it can be used as an "FTP (File Transfer Protocol) server". If you connect the recorder which is equipped with the ether card to a personal computer using a LAN cable, you can transfer audio files between the re- corder and personal computer over the TCP/IP. To transfer file data, an appropriate FTP client ap- plication must be used.

Installing the ether card

The ether card should be installed into the recorder at a Fostex service station. Do not try to install the card by yourself. Ask your local Fostex dealer for the installation after purchasing the Model 8360.

<Note>

By installing the ether card to the D2424/D2424LV, the "TCP/IP setting" menu is added to the setup mode on the recorder.

<Note>

There is the possibility of damaging the hard disk when transporting the recorder. Before transporting the re- corder to our service department for the installation of the Ether Card, remove the hard disk from the recorder. Be sure to keep the removed hard disk carefully.

FTP client applications

Currently we confirm that the following FTP client applications can be used with the Model 8360.

for Windows: WS-FTP (shareware)

for Macintosh: Fetch (shareware)

<Note>

We confirm that the Windows FTP Explorer cannot be used with the Model 8360.

2

Page 2
Image 2
Fostex 8360 owner manual Introduction, Installing the ether card, FTP client applications