Connecting to a personal computer
There are two types for connecting the recorder to a personal computer using the LAN cable; one to one connection and LAN connection. The following describes how to make connection for each type.
One to one connection
To connect the recorder to a personal computer on a "one to one" basis, use a "cross cable of category 5 or higher" for connection between the recorder and a personal computer, as shown below.
To use the ether card as an FTP server, see "TCP/IP setting (recorder's initial setting)" and "Personal com- puter setting" described later.
D2424LV/D2424 with the ether card
1 | 1 |
2 | 2 |
3 | 3 |
4 | 4 |
5 | 5 |
6 | 6 |
7 | 7 |
8 | 8 |
Cross cable of category 5 or higher
Personal computer with an FTP application installed
<Note>
A personal computer must be equipped with a LAN card which works correctly.
3
