SOYO SY-7IWA-F user manual User Password, Entering the password

BIOS Setup Utility SY-7IWA-F

3.Enter your new password and press [Enter]. The following message appears, prompting to confirm the new password:

Confirm Password:

4.Re-enter your password and then press [Enter] to exit to the Main Menu.

This diagram outlines the password selection procedure:

TTypethethePasswordsword		ROM PCI/ISA BIOS		Press <Enter> without
and Press: <Enter>				Press: ↔
				entering the password
Press:	↔	CMOS SETUP UTILITY
				Without entering password
		AWARD SOFTWARE, INC.
STANDARD CMOS SETUP			INTEGRATED PERIPHERALS
		Enter Password:
BIOS FEATURES SETUP			SUPERVISOR PASSWORD
CHIPSET FEATURES SETUP			USER PASSWORD
Enter Password: ∗ ∗ ∗ ∗ ∗				Password Disabled!!
POWER MANAGEMENT SETUP			IDE HDD AUTO DETECTION
PNP/PCI CONFIGURATION			SAVE & EXIT SETUP
Confirm Password: ∗ ∗ ∗ ∗ ∗
LOAD SETUP DEFAULTS			EXIT WITHOUT SAVING
LOAD BIOS DEFAULTS
Esc : Quit		After you confirm the password,
		After you confirm− ↓ → ←the: Select Item
		press <Esc> to exit
F10 : Save & Exit Setup			(Shift)° F2 : Change Color
		password, press		to exit

Time,Date, Hard Disk Type…

3-12 USER PASSWORD

When the user password option is on, you are not allowed to change any setting in the [CMOS SETUP UTILITY] except for changing the user's password.

The password setting procedure is similar to that for the [SUPERVISOR PASSWORD] (Refer to section 3-9).

82