SOYO SY-7IWA-F user manual Setting IDE HDD Block Mode, FDC Controls Setting Onboard FDC

	BIOS Setup Utility				SY-7IWA-F
	3-5.3 IDE HDD Block Mode
			Setting			Note
	IDE HDD Block Mode
			Disabled
					Invokes multi-sector
					transfer instead of one
					all HDDs support this
					function.
3-5.4
	FDC Controls		Setting			Note
	Onboard FDC
			Disabled
					floppy controller
			Enabled		Use the on-board floppy	Default
	3-5.5 Onboard Serial Ports
	Onboard Serial	Setting		Description

Onboard Serial Port 1 /

UART Mode Select

Disabled

3F8/IRQ4	Choose serial port 1 & 2's I/O
		(port 1)
2F8/IRQ3	Do not set port 1 & 2 to the
	same address except for	(port 2)
3E8/IRQ4
Auto
Normal	The second serial port offers	Default
	these InfraRed interface

If [UART Mode Select] is set to [IrDA]/[ASKIR]

RxD, TxD Active		This item allows you to
	Lo, Hi, Hi, Lo
		TxD.
	Disabled
delay	Enabled		Default
		item enabled.
		68