SOYO SY-7IWA-F user manual Infrared IR1, CD Line-in J10,J11

Hardware Installation SY-7IWA-F

3.Infrared (IR1)

Plug the 5-pin infrared device cable to the IR1 header. This will enable the infrared transfer function. This Motherboard meets both the ASKIR and HPSIR specifications.

Please install according to the following pin assignment:

Serial Infrared (IR1) Connector

IR1 Pin Assignment

1 2 3 4 5

VCC

IRRX GND

IRTX

4.CD Line-in (J10,J11)

This Motherboard provides two CD-Line in connectors. Please connect the 4-pin audio cable from your CD-ROM drive to either J10 or J11. (It fits in only one, depending on the cable that came with your CD-ROM drive)

Please install according to the following pin assignment:

J10,J11(CD Line-in)

Pin Assigment

GND Right

GND Left

J10

4	Right	4
3	GND	3
2	GND	2
1	Left	1
		J11

34