SOYO SY-7IWA-F user manual Select Standard Cmos Setup, Select Load Optimized Defaults

Hardware Installation SY-7IWA-F

Step 1. Select [STANDARD CMOS SETUP]

Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to

“Auto”.

Step 2. Select [Load Optimized Defaults]

Select the “Load Optimized Defaults” menu and type “Y” at the prompt to

load the BIOS optimal setup.

Step 3. Select [Soyo Combo Feature]

(a) CPU Host/PCI Clock

CPU Host / PCI Clock

o 66/33	o 100/33	o 133/44	The PCI clock frequency depends on
			the CPU Host clock. (Fixed pairs in the
			clock generator) see the table on the
o 70/35	o 105/35	o 140/35
			left side for all possible pairs.
o 75/37	o 114/38	o 150/37
o 83/41	o 120/40
o 90/30	o 124/41
o 95/31	o 133/33

(b) CPU Ratio

After you have selected the CPU Host/ PCI Clock, choose the right

multiplier for the CPU. CPU Ratio options are:

o x 2	o x 2.5	o x 3	o x 3.5	o x 4
o x 4.5	o x 5	o x 5.5	o x 6	o x 6.5
o x 7	o x 7.5	o x 8

The CPU frequency is then defined as [host clock freq.] x [multiplier], and should the working frequency of your CPUs processor.

Step 4. Select [Save & Exit Setup]

Press <Enter> to save the new configuration to the CMOS memory, and continue the boot sequence.

46