Manuals / Compatible Systems / Power Tools / Router

Compatible Systems 1220I WAN 0 Link & Physical Defaults, RS-232 WAN 1 Link & Physical Defaults

Models: 1220I

1 45

Download 45 pages 48.67 Kb

Page 36

30	Appendix A - Shipping Defaults

V.35 (WAN 0) Link & Physical Defaults

•PPP

•Dedicated

•Sync, external clock

RS-232 (WAN 1) Link & Physical Defaults

•PPP

•Dial-in

•Async @ 115.2Kbps

•Hardware flow control

Image 36

Compatible Systems 1220I manual WAN 0 Link & Physical Defaults, RS-232 WAN 1 Link & Physical Defaults

Contents

MicroRouter Installation Guide Page Network Installation IntroductionGetting Started Basic Configuration Guide CompatiView Software InstallationAppendix a Shipping Defaults Appendix B Connector and Cable Pin OutsSystems Appendix E Terms and Conditions Introduction About the MicroRouterIntroduction MicroRouter 1220i Installation Overview Getting StartedIntroduction Network Installation CompatiView Software InstallationCommand Line Preparation Basic Configuration GuidePage Warranty and Service Getting StartedFew Notes Please Read The ManualsNeeded For Installation What You Will Need To Get StartedSupplied with the MicroRouter Ethernet Connection RequirementsTelco Line Connection Requirements Getting Started 10Base-T Twisted-Pair EthernetInterface Getting Started RS-232 InterfaceNetwork Installation Placing the RouterConnecting the Router to the Ethernet Connecting a Line Device to MicroRouterConnecting to Twisted-Pair Ethernet Connecting Devices to the V.35 InterfaceConnecting an Out-of-Band Management Console Connecting Devices to the RS-232C InterfacePowering Up the Router Installation and Operation CompatiView for WindowsSystem Requirements CompatiView Software Installation Transport Protocols and CompatiViewCommand Line Management Out-of-Band Command Line ManagementSetting Up Telnet Operation Command Line ManagementCommand Line Management Page Basic Configuration Guide Basic Configuration GuideEthernet Interface Configuration IP ProtocolRequired for IP Suggested for IPWAN Interface Configuration Physical Communications SettingsIPX Protocol Required for IPXLink Configuration Required for Dedicated/Leased Line OperationSuggested for Dedicated/Leased Line Operation Required for Dial-On-Demand OperationIP Protocol Frame Relay Configuration Frame Relay Dlci MappingsRequired for IP Numbered Interface Required for IP Unnumbered InterfaceIPX Protocol Saving a Configuration File to Flash ROM Smds AddressingPage Appendix a Shipping Defaults Ethernet InterfacesWAN Interfaces WAN 0 Link & Physical Defaults RS-232 WAN 1 Link & Physical DefaultsAppendix B Connector and Cable Pin Outs Pin Outs for V.35 Female Connector DTEAppendix B Connector and Cable Pin Outs Power On, No Traffic Ethernet Traffic Indicators Ethernet LED BarsOther Indicators on All LED Bars Panic IndicatorsMicroRouter 1220i Switch Settings Appendix C LED Patterns and Test Switch SettingsAppendix D Downloading Software From Compatible Systems Page Appendix E Terms Conditions Appendix E Terms and ConditionsAppendix E Terms and Conditions Appendix E Terms and Conditions