Basic Configuration Guide | Compatible Systems 1220I guide

Chapter 4 - CompatiView Software Installation	13
COMPATIVIEW FOR WINDOWS	13
System Requirements	13
Installation and Operation	13
Transport Protocols and CompatiView	14

Chapter 5 - Command Line Management	15
OUT-OF-BANDCOMMAND LINE MANAGEMENT	15
TEMPORARILY RECONFIGURING A HOST FOR COMMAND LINE
MANAGEMENT	15
SETTING UP TELNET OPERATION	16

Chapter 6 - Basic Configuration Guide	19
ETHERNET INTERFACE CONFIGURATION	20
IP Protocol	20
Required for IP	20
Suggested for IP	20
IPX Protocol	21
Required for IPX	21
Suggested for IPX	21
WAN INTERFACE CONFIGURATION	21
Physical Communications Settings	21
Link Configuration	22
Required for Dedicated/Leased Line Operation	22
Suggested for Dedicated/Leased Line Operation	22
Required for Dial-On-Demand Operation	22
Suggested for Dial-On-Demand Operation	22
IP Protocol	23
Required for IP	23
Suggested for IP	23
IPX Protocol	23
Required for IPX	23

ii

Image 4

Compatible Systems 1220I manual Basic Configuration Guide, CompatiView Software Installation

Contents

MicroRouter Installation Guide Page Introduction Network InstallationGetting Started Basic Configuration Guide CompatiView Software Installation Appendix a Shipping Defaults Appendix B Connector and Cable Pin Outs Systems Appendix E Terms and Conditions About the MicroRouter IntroductionIntroduction MicroRouter 1220i Installation Overview Getting Started Introduction Network Installation CompatiView Software InstallationCommand Line Preparation Basic Configuration GuidePage Warranty and Service Getting StartedFew Notes Please Read The Manuals Needed For Installation What You Will Need To Get StartedSupplied with the MicroRouter Ethernet Connection Requirements Getting Started 10Base-T Twisted-Pair Ethernet Telco Line Connection RequirementsInterface RS-232 Interface Network Installation Placing the Router Connecting the Router to the Ethernet Connecting a Line Device to MicroRouterConnecting to Twisted-Pair Ethernet Connecting Devices to the V.35 Interface Connecting an Out-of-Band Management Console Connecting Devices to the RS-232C Interface Powering Up the Router CompatiView for Windows Installation and OperationSystem Requirements Transport Protocols and CompatiView Command Line Management Out-of-Band Command Line Management Setting Up Telnet Operation Command Line Management Command Line Management Page Basic Configuration Guide Ethernet Interface Configuration IP ProtocolRequired for IP Suggested for IP WAN Interface Configuration Physical Communications SettingsIPX Protocol Required for IPX Link Configuration Required for Dedicated/Leased Line OperationSuggested for Dedicated/Leased Line Operation Required for Dial-On-Demand Operation IP Protocol Frame Relay Configuration Frame Relay Dlci Mappings Required for IP Numbered Interface Required for IP Unnumbered Interface IPX Protocol Saving a Configuration File to Flash ROM Smds AddressingPage Ethernet Interfaces Appendix a Shipping DefaultsWAN Interfaces WAN 0 Link & Physical Defaults RS-232 WAN 1 Link & Physical Defaults Appendix B Connector and Cable Pin Outs Pin Outs for V.35 Female Connector DTE Appendix B Connector and Cable Pin Outs Power On, No Traffic Ethernet Traffic Indicators Ethernet LED BarsOther Indicators on All LED Bars Panic Indicators MicroRouter 1220i Switch Settings Appendix C LED Patterns and Test Switch Settings Appendix D Downloading Software From Compatible Systems Page Appendix E Terms Conditions Appendix E Terms and Conditions Appendix E Terms and Conditions Appendix E Terms and Conditions