Note – After you log in to ILOM using the default user name and password, you should change the the ILOM root account password (changeme). See the Sun Integrated Lights Out Manager 2.0 User’s Guide for details.
3.Click Log In.
The web interface Versions page appears.
FIGURE 2-3 Versions Page
▼To Connect to the ILOM CLI
You can access the ILOM CLI remotely through a Secure Shell (SSH) or serial connection. Secure Shell connections are enabled by default.
If you do not know the ILOM’s IP address, find it as described in “Displaying the Service Processor’s (ILOM) IP Address” on page 23.
The following procedure shows an example using an SSH client on a UNIX system. Use an appropriate SSH client for your operating system. The default user name is root and default password is changeme.
Follow these steps to log in to ILOM using the default enabled SSH connection:
1.To log on to the ILOM, type: $ ssh root@ipaddress
where ipaddress is the ILOM IP address.
2.Type the password when prompted. The default is changeme:
Password: changeme
Chapter 2 Installing and Configuring the Server Module | 25 |
