Displaying the Service Processor’s (ILOM) IP Address
Use the following procedure to display the ILOM’s network configuration, including including the IP address of the ILOM SP, using the CMM ILOM.
This procedure also verifies that the ILOM is working correctly and that you can access it through the CMM ILOM.
▼To Display the Service Processor’s (ILOM) IP Address
1.Log in to the CMM ILOM CLI.
2.Type the command:
show /CH/BLn/SP/network
where n is the server module number or chassis slot ID.
The CMM ILOM displays information about the server module, including its IP address and MAC address. For example:
-> show /CH/BL0/SP/network
/CH/BL0/SP/network
Targets:
Properties:
type = Network Configuration commitpending = (Cannot show property) ipaddress = IPaddress
ipdiscovery = dhcp ipgateway = IPgateway ipnetmask = 255.255.252.0 macaddress = Macaddress pendingipaddress = IPaddress pendingipdiscovery = dhcp pendingipgateway = IPgateway pendingipnetmask = 255.255.252.0
Commands: cd set show
Connecting to the ILOM
This section describes how to connect to the ILOM’s CLI and web GUI.
Chapter 2 Installing and Configuring the Server Module | 23 |
