10.After you make your selections, press Enter.
The Array Properties view appears, as shown in FIGURE
FIGURE B-6 Array Properties View
11.Make the following selections:
■Array Type – Select an array type from the
■Array Label – Type in a label.
■Stripe Size – Type in a stripe size.
■Read Caching – Type Y or N.
■Write Caching – Select an option from the list.
12.Press Enter or click Done to proceed.
Depending on the Write Caching selection, a number of warnings might appear:
■If the Write Caching setting is Enable Always, and if you do not have a battery, or if the battery is not charged sufficiently, several warnings might appear. Type Yes to proceed, or type No to return to the Array Properties screen.
■If the write cache is enabled, a write cache warning appears (FIGURE
Appendix B Using the BIOS Configuration Utility to Configure the Sun Blade RAID 5 Expansion Module | 61 |
