SOYO SY-7IWA-F Universal Serial Bus USB1/USB2, Flat Panel Connector, VGA monitor connector

Hardware Installation SY-7IWA-F

3.Universal Serial Bus USB1/USB2

This Motherboard provides two USB ports for your additional devices. Plug the USB device jack into the available USB connector USB1 or USB2.

-Standard device drivers come with the Win98 for commonly used USB devices.

-With Win95, use the flow UHCI specifications. To use USB devices under Win95, usually you have to install the device driver comes with the USB device you have purchased.

4.Flat Panel Connector

Plug the flat panel cable into this 20 pin mini-D ribbon type receptacle.

This motherboard supports industry standard DFP (Digital Flat Panel) interface by using the TMDS (Transmission Minimized Differential Signaling) technology. It is compliant with the DVI (Digital Visual Interface) 1.0 specifications and is backwards compliant with VESA P&D, EDID and DDC standards.

5.VGA monitor connector

Plug the monitor cable into the 15-pin female VGA connector located at the real panel of the motherboard.

6.Onboard Joystick port/audio

This Motherboard provides Joystick port and audio.

-Attach the joystick cable to the 15-pin JOYSTICK port at the rear panel of you motherboard.

-This Motherboard features three built-in audio-stereo ports (labeled line-in, line-out, and mic jack) convenient to directly plug-in all your external audio devices.

31