7. Installation
7.1Terrestrial Channel Search
Tip:
•The default password is 0000.
•If you have forgotten your password, please contact your local product distributor.
You can search the terrestrial channels.
1.Press the MENU button.
2.Select Installation using the / button and press the OK or button.
3.Select Terrestrial Channel Search using the / button and press the OK or button.
1.Automatic Search
If your product is connected to the aerial and television, you can automatically search channels without entering any other information.
1.Select Automatic Search using the / button and press the OK or button.
2.Wait while channel search continues. This may take a few minutes.
3.While operating search, the cursor is located at Stop. Therefore, if you press the OK button during searching, the operation is stopped and the channels found until then will be displayed.
4.If search operation is successfully completed and the channel does not exist, press the OK button and try to reset the search operation again if necessary.
5.You can delete unnecessary channels from the searched channels. Select the channels to delete and press the OK button. Then select Delete and press the OK button. To delete all channels, select Select All to select all channels, select Delete and press the OK button.
6.When completing channel search and deleting unnecessary channels, select Save and press the OK button to save the changes.
GB49
User’s Manual
