7. Installation
7.3Software Update
In order to maintain proper performance of the product, it is essential to have the most
– http://www.humaxdigital.com.
It is recommended that you periodically check for the availability of software update.
1.Press the MENU button.
2.Select Installation using the / button and press the OK or button.
3.Select Software Update using the / button and press the OK or button.
1. OTA (Over The Air)
OTA, an abbreviation of
1.The equipment should have the appropriate loader software.
Caution: Please note that if the normal loader software is not equipped, the product may not be updated or operate properly after software update.
2.The manufacturer decides to release the software via a designated channel.
3.The equipment must be tuned properly to the same aerial equivalent to that of the manufacturer.
4.Update software when the signal strength and quality is high. If the signal strength and quality are not recommendable, perform the software update later.
Caution:
•Please be careful to keep the power on and the power cord plugged in during software update. If the power is off during software update, fatal damage may be caused to the product.
•Please be careful not to pull out the signal line
GB58
User’s Manual