7. Installation

Installer Menu

1.Select Installer Menu using the ￿/￿ button and press the OK or ￿ button to set default setting and operation limit for motor antenna.

2.Select Motor Limit using the ￿/￿ button and press the OK or ￿ button to select Enable/Disable. To save the present location, change the Motor Limit to Enable.

Enable

Motor limit is set. motor does not exceed

the limit.

 

Disable

Setting is released.

 

 

Note:

When Motor Limit is set to Enable, Limit Position and Set Limits are set to Disabled.

When setting new motor limit, set to Disable.

3.Select Limit Position using the ￿/￿ button and press the OK or ￿ button to select East/West.

4.Select Set Limit using the ￿/￿ button and press the ￿/￿ button to move the antenna to the limit position.

Note: When limit is set, Motor Limit is automatically set to Enable.

5.Select Reset Positions using the ￿/￿ button and press the OK button to restore the position saved at motor antenna to the factory default. A pop-up will appear. Select OK and press the OK button. Please wait while the motor antenna is restored.

Note: Reset may not be activated depending on the condition of the antenna. Repeat the procedure above if necessary.

GB55

User’s Manual

Page 56
Image 56
Humax COMBO-9000 manual Installer Menu, Enable, Disable