7. Installation

Note:

It may take 5~10 minutes to update software.

Other functions will not activate while software update takes place.

You cannot schedule programmes during software update.

2.Automatic Update

You can set the product to find HUMAX software update site and update software automatically.

1.Select Automatic Update using the ￿/￿ button and press the OK or ￿ button.

2.Automatically search for new software. Select Cancel and press the OK button to finish search.

3.When detecting software update, the following result is displayed. If new software is not found by automatic update, use manual update.

4.Select Yes and press the OK button to start updating. Select No and press the OK button to return to the previous menu without updating.

5.When completing the software update, the product is automatically powered off and on again.

3.Manual Update

You can perform manual update using know MUX information.

1.Select Manual Update using the ￿/￿ button and press the OK or ￿ button.

2.Select Channel using the ￿/￿ button and press the OK or ￿ button. Select the channel number using the ￿/￿ button and press the OK or ￿ button.

3.Select Frequency using the ￿/￿ button and press the OK or ￿ button. Enter the frequency using the NUMERIC(0-9)buttons.

4.Select Search and press the OK button to search software. Existing new software will show. If new software does not exist, press the OK button to return to the manual update menu.

5.Select Yes and press the OK button to start updating. Select No and press the OK button to return to the previous menu. Performs software update. Please wait until it is completed.

6.When completing the software update, the product is automatically powered off and on again.

GB59

User’s Manual

Page 60
Image 60
Humax COMBO-9000 manual Automatic Update, Manual Update