Command Line Interface
History command
Displays a numbered list of the previously entered commands from which you can
Authority
None
Syntax
HISTORY
Notes
Use the History command to provide context for the ! command:
■Enter ![command] to
■Enter ![line number] to
■Enter ![partial command string] to
■Enter !! to
Examples
2/8q FC Switch #> history 1 show switch
2date
3help set
4history
2/8q FC Switch #> !3 help set
set SET_OPTIONS
There are many attributes that can be set.
Type help with one of the following to get more information:
Usage: set { alarm | beacon | config | log | pagebreak |
port | setup | switch } |
|
|
Hotreset command
Resets the switch for the purpose of activating the pending firmware without disrupting traffic. This command terminates all management sessions, saves all configuration information, and clears the alarm log. After the pending firmware is activated, the configuration is recovered. This process takes less than 80 seconds. To save the alarm log to a file before resetting, refer to the “Set Log Command” on page 144.
Authority
Admin