Command Line Interface
ACTIVE
Displays the name of the active zone set. This keyword does not require Admin session.
ADD[zone_set] [zone_list]
Adds a list of zones and aliases given by [zone_list] to the zone set given by [zone_set]. Use a <space> to delimit zone and alias names in [zone_list].
COPY [zone_set_source] [zone_set_destination]
Creates a new zone set named [zone_set_destination] and copies into it the zones from the zone set given by [zone_set_source].
CREATE [zone_set]
Creates the zone set with the name given by [zone_set]. A zone set name must begin with a letter and be no longer than 64 characters. Valid characters are
DEACTIVATE
Deactivates the active zone set. Close the Zoning Edit session before using this keyword.
DELETE[zone_set]
Deletes the zone set given by [zone_set]. If the specified zone set is active, the command is suspended until the zone set is deactivated.
LIST
Displays a list of all zone sets. This keyword does not require an Admin session.
REMOVE[zone_set] [zone_list]
Removes a list of zones given by [zone_list] from the zone set given by [zone_set]. Use a <space> to delimit zone names in [zone_list]. If [zone_set] is the active zone set, the zone will not be removed until the zone set has been deactivated.
RENAME [zone_set_old] [zone_set_new]
Renames the zone set given by [zone_set_old] to the name given by [zone_set_new]. You can rename the active zone set.
ZONES [zone_set]
Displays all zones that are components of the zone set given by [zone_set]. This keyword does not require an Admin session.
Notes
■A zone set must be active for its definitions to be applied to the fabric.
■Only one zone set can be active at one time.
■A zone can be a component of more than one zone set.
Examples
The following is an example of the Zoneset Active command:
2/8q FC Switch #> zoneset active
ActiveZoneSet Bets
LastActivatedBy
LastActivatedOn day month date time year