Command Line Interface
Examples
The following example shows how to open and close an Admin session:
2/8q FC Switch #> admin start
2/8q FC Switch (admin) #>
.
.
.
2/8q FC Switch (admin) #> admin end 2/8q FC Switch #>
Alias command
Creates a named set of ports/devices. Aliases make it easier to assign a set of ports/devices to many zones. An alias can not have a zone or another alias as a member.
Authority
Admin session for all keywords except List and Members.
Syntax
ALIAS
Keywords
ADD [ALIAS] [ MEMBER_LIST]
Specifies one or more ports/devices given by [member_list] to add to the alias named [alias]. Use a <space> to delimit ports/devices in [member_list]. An alias can have a maximum of 2000 members. The application verifies that the [alias] format is correct, but does not validate that such a port/device exists. A port/device in [member_list] can have any of the following formats:
—Domain ID and port number pair (Domain ID, Port Number). Domain IDs can be
—
—
COPY [ALIAS_SOURCE] [ALIAS_DESTINATION]
Creates a new alias named [alias_destination] and copies the membership into it from the alias given by [alias_source].
CREATE [ALIAS]
Creates an alias with the name given by [alias]. An alias name must begin with a letter and be no longer than 64 characters. Valid characters are