Command Line Interface

The following is an example of the Show Version command:

2/8q FC Switch #> show version

*****************************************************

*

 

*

*

Command Line Interface SHell (CLISH)

*

*

 

*

*****************************************************

SystemDescription

HP StorageWorks 2/8q FC Switch

Eth0NetworkAddress

10.0.0.1 (use 'set setup system' to update)

MACAddress

00:c0:dd:03:cf:cc

WorldWideName

10:00:00:c0:dd:03:cf:cc

ChassisSerialNumber 0346A00032

SymbolicName

2/8q FC Switch

ActiveSWVersion

V4.0.0.4-0

ActiveTimestamp

Thu Sep 2 18:41:02 2004

DiagnosticsStatus

Passed

Show Config command

Displays switch, port, alarm threshold, and zoning for the current configuration.

Authority

None

Syntax

SHOW CONFIG

Keywords

PORT [port_number]

Displays configuration parameters for the port number given by [port_number]. Ports are numbered beginning with 0. If [port_number] is omitted, all ports are specified.

SWITCH

Displays configuration parameters for the switch.

THRESHOLD

Displays alarm threshold parameters for the switch.

AONING

Displays zoning configuration parameters for the switch.

Examples

The following is an example of the Show Config Port command: 2/8q FC Switch #> show config port 3

Port Number: 3

------------

AdminState Offline