HP 2/8q Fibre Channel Following is an example of the SET Config Switch command, 8q FC Switch

Command Line Interface

ExtCredit	(dec value, increments of 15, non-loop only)	[0	]
FANEnable	(True / False)	[True	]
LCFEnable	(True / False)	[False ]
MFSEnable	(True / False)	[False ]
MSEnable	(True / False)	[True	]
NoClose	(True / False)	[False ]
IOStreamGuard (Enable / Disable)		[Disable]
VIEnable	(True / False)	[False ]
PDISCPingEnable (True / False)		[True	]

Finished configuring attributes.

This configuration must be saved (see config save command) and

activated (see config activate command) before it can take effect. To discard this configuration use the config cancel command.

2/8q FC Switch (admin-config) #>

The following is an example of the SET CONFIG SWITCH command:

2/8q FC Switch #> admin start

2/8q FC Switch (admin) #> config edit

2/8q FC Switch (admin-config) #> set config switch

A list of attributes with formatting and default values will follow.

Enter a new value or simply press the ENTER key to accept the current value.

If you wish to terminate this process before reaching the end of the list

press 'q' or 'Q' and the ENTER key to do so.

AdminState	(1=Online, 2=Offline, 3=Diagnostics) [Online		]
BroadcastEnable	(True / False)	[False	]
InbandEnabled	(True / False)	[False	]
DefaultDomainID	(decimal value, 1-239)	[11	]
DomainIDLock	(True / False)	[True	]
SymbolicName	(string, max=32 chars)	[2/8q FC Switch]
R_A_TOV	(decimal value, 100-100000 msec)	[10000	]
E_D_TOV	(decimal value, 10-20000 msec)	[2000	]
PrincipalPriority	(decimal value, 1-255)	[254	]
ConfigDescription	(string, max=32 chars)	[2/8q FC Switch]
InteropMode	(True / False)	[True	]

142 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide