Command Line Interface

Table 56: System configuration settings (Continued)

Entry

Description

RemoteLogHostAddress

The IP address of the host that will receive the switch event log

 

information if remote logging is enabled. The default is

 

10.0.0.254.

 

 

NTPClientEnabled

Enables (True) or disables (False) the Network Time Protocol

 

(NTP) client on the switch. This client enables the switch to

 

synchronize its time with an NTP server. This feature supports

 

NTP version 4 and is compatible with version 3. An Ethernet

 

connection to the server is required and you must first set an

 

initial time and date on the switch. The synchronized time

 

becomes effective immediately. The default is False.

 

 

NTPServerAddress

The IP address of the NTP server from which the NTP client

 

acquires the time and date. The default is 10.0.0.254.

 

 

Examples

 

The following is an example of the Set Setup SNMP command:

2/8q FC Switch #> admin start

2/8q FC Switch (admin) #> set setup snmp

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.

Trap Severity Options

 

 

---------------------

 

 

unknown, emergency,

alert, critical, error, warning, notify, info, debug, mark

SNMPEnabled

(True / False)

[True

]

Contact

(string, max=64 chars)

[<sysContact undefined]

Location

(string, max=64 chars)

[sysLocation undefined]

Trap1Address

(dot-notated IP Address)

[10.20.71.15

]

Trap1Port

(decimal value)

[162

]

Trap1Severity

(see allowed options above)

[warning

]

Trap1Version

(1 / 2)

[2

]

Trap1Enabled

(True / False)

[False

]

Trap2Address

(dot-notated IP Address)

[0.0.0.0

]

Trap2Port

(decimal value)

[162

]

Trap2Severity

(see allowed options above)

[warning

]

Trap2Version

(1 / 2)

[2

]

Trap2Enabled

(True / False)

[False

]

Trap3Address

(dot-notated IP Address)

[0.0.0.0

]

Trap3Port

(decimal value)

[162

]

Trap3Severity

(see allowed options above)

[warning

]

Trap3Version

(1 / 2)

[2

]

Trap3Enabled

(True / False)

[False

]

Trap4Address

(dot-notated IP Address)

[0.0.0.0

]

Trap4Port

(decimal value)

[162

]

Trap4Severity

(see allowed options above)

[warning

]

Trap4Version

(1 / 2)

[2

]

Trap4Enabled

(True / False)

[False

]