HP 2/8q Fibre Channel manual Following is an example of the Zone List command

Command Line Interface

REMOVE [zone] [member_list]

Removes the ports/devices given by [member_list] from the zone given by [zone]. Use a <space> to delimit aliases and ports/devices in [member_list]. [member_list] can have any of the following formats:

—Domain ID and port number pair (Domain ID, Port Number). Domain IDs can be 1-239; port numbers can be 0-255.

—6-character hexadecimal device Fibre Channel address (hex)

—16-character hexadecimal worldwide port name (WWPN) with the format xx:xx:xx:xx:xx:xx:xx:xx.

—Alias name

RENAME [zone_old] [zone_new]

Renames the zone given by [zone_old] to the zone given by [zone_new].

TYPE [zone] [zone_type]

Specifies the zone type given by [zone_type] to be assigned to the zone name given by [zone]. If you omit the [zone_type], the system displays the zone type for the zone given by [zone]. [zone_type] can be one of the following:

soft—name server zone

hardACL—Access control list hard zone. This keyword is case sensitive.

ZONESETS [zone]

Displays all zone sets of which the zone given by [zone] is a component. This keyword does not require an Admin session.

Examples

The following is an example of the Zone List command:

2/8q FC Switch #> zone list

Zone ZoneSet

-------------------

wwn_b0241f

zone_set_1

wwn_23bd31

zone_set_1

wwn_221416

zone_set_1

wwn_2215c3

zone_set_1

wwn_0160ed

zone_set_1

HP StorageWorks 2/8q Fibre Channel Switch Management User Guide 175