HP 2/8q Fibre Channel manual Deselect the donor ports, and then retry

Switch Manager

Table 33: Faceplate display messages (Continued)

Message	User action
One of the selected ports is currently in use as	Deselect the donor ports, and then retry the
a donor port to allow for extended credits on	operation.
another port. Modifications to donor ports are
not permitted.
Port reset failed.	Verify that the user has permissions to modify
or	the configuration on the switch, that the switch
Request to reset to factory defaults has failed.	is reachable in the fabric, and that the fabric is
or	reachable from the user’s workstation, and
Request for switch reset failed.	then retry the configuration change.
Request for switch reset failed because admin	Verify that another user is not currently
access was not available.	modifying the switch configuration, using
	either the management application, or a telnet
	login, or any application, and then retry the
	operation.
Reset will complete shortly. There is a brief loss	Wait for the switch to become reachable
of connectivity with switch.	again. This may take up to one minute.
Resetting the switch will disrupt traffic. Do you	The requested action causes the servers and
wish to continue?	storage systems attached to the fabric to lose
or	communications until the switch reset is
Deactivating the active zone set will disrupt	complete and the fabric has re-initialized. If
traffic. Do you wish to continue?	this is acceptable, continue; otherwise cancel
	the operation.
Resetting to factory defaults will disrupt traffic	This action is disruptive to the fabric. Verify
and cause current switch configuration to be	that this is the action that you want to take.
lost.
Showing Last Known State.	The switch state displayed by the application
	cannot be updated because the switch has
	become unreachable. Verify that the switch is
	reachable in the fabric, and that the fabric is
	reachable from the user’s workstation.
The file currently exists.	The selected switch archive file already exists.
	If it is acceptable to overwrite the file, continue.
	Otherwise, return and select a different
	archive file.
The online port loopback test can only be	Select only a single port, and then retry the
performed on a single port at a time. There	operation.
are multiple ports selected. Continue with
loopback test on first selected port.
The zoning information you are about to edit	The application has not been able to
is incomplete. If you apply changes you will	completely read the current zoning database
possibly lose zoning information.	from the switch. If the user edits the incomplete
	database information and applies the
	changes, any information which has not been
	read from the switch is lost.
	If this is acceptable, continue. Otherwise,
	verify that the switch is reachable in the fabric,
	and that the fabric is reachable from the user’s
	workstation then refresh the display and verify
	that the zoning database has been completely
	read, and then retry the operation.
Unable to perform request. Switch is currently	Verify that the switch is reachable in the
unreachable.	fabric, and that the fabric is reachable from
	the user’s workstation, and then retry the
	operation.

HP StorageWorks 2/8q Fibre Channel Switch Management User Guide 103