Equipment symbols | HP 2/8q Fibre Channel instruction

About this Guide

Equipment symbols

The following equipment symbols may be found on hardware for which this guide pertains. They have the following meanings:

Any enclosed surface or area of the equipment marked with these symbols indicates the presence of electrical shock hazards. Enclosed area contains no operator serviceable parts.

WARNING: To reduce the risk of personal injury from electrical shock hazards, do not open this enclosure.

Any RJ-45 receptacle marked with these symbols indicates a network interface connection.

WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug telephone or telecommunications connectors into this receptacle.

Any surface or area of the equipment marked with these symbols indicates the presence of a hot surface or hot component. Contact with this surface could result in injury.

WARNING: To reduce the risk of personal injury from a hot component, allow the surface to cool before touching.

Power supplies or systems marked with these symbols indicate the presence of multiple sources of power.

WARNING: To reduce the risk of personal injury from electrical shock, remove all power cords to completely disconnect power from the power supplies and systems.

Any product or assembly marked with these symbols indicates that the component exceeds the recommended weight for one individual to handle safely.

WARNING: To reduce the risk of personal injury or damage to the equipment, observe local occupational health and safety requirements and guidelines for manually handling material.

16	HP StorageWorks 2/8q Fibre Channel Switch Management User Guide

Image 16

HP 2/8q Fibre Channel manual Equipment symbols

Contents

HP StorageWorks 8q Fibre Channel Switch Management Copyright 2004 Hewlett-Packard Development Company, L.P Contents Contents Contents Contents Contents Contents Show Setup command Figures Tables Contents About This Guide Related documentation Intended audienceThis section covers the following topics Text symbols Document conventionsConventions consist of the following This document follows the conventions in Table Equipment symbols HP installation and configuration assistance Getting help Web site, select the appropriate product or solution HP technical supportHP storage web site HP authorized reseller Switch Manager Installing Switch Manager on Windows systems Installing Switch ManagerMinimum Requirements Starting Switch Manager Installing Switch Manager on Linux systems To exit a Switch Manager application session Exiting Switch ManagerSelect File Exit Removing Switch Manager Removing Switch Manager from WindowsRemoving Switch Manager from Linux Select File Save Default Fabric View File Setting Switch Manager preferences Preferences dialog box Using online help Using the Switch Manager user interfaceViewing software version and copyright information Select Help Help Topics Switch Manager Faceplate window Menu bars Shortcut Selection Faceplate display menu bar options and shortcut keys Fabric tree Tool barButton Description Graphic window Using the topology display Working status indicatorData window and tabs Selecting switches Using the faceplate display Faceplate display Port views and status Selecting ports User account security Managing fabric securityComponents of Fibre Channel fabric security are Fabric services Select Snmp Enabled in the Snmp Configuration areaSelect In-band Management Enable Managing the fabric database Removing a fabric Opening a fabric view fileClick Add Fabric Select Fabric Remove Fabric Saving a fabric view file Adding a new switch to a fabricRediscovering a fabric Deleting switches and links Replacing a failed switchSelect Switch Reset Switch Fabric status Displaying fabric informationSelect View Refresh Event Browser Severity Icon Description Filter Events dialog box Sorting the Event Browser Active Zoneset data window Select File Save As Zoning a fabric Zoning concepts Soft Zones Zoning configuration Using the Zoning Config dialog box Restoring default zoning Using the Edit Zoning dialog box Merging fabrics and zoning Edit Zoning dialog box Tool bar button / icon Description Managing zone sets Copying a zone to a zone set Managing zones Managing zones involves the following Click WWN, Domain Port, or FC Address Select Edit Remove Managing aliases Select Edit Remove Zone from All Sets Select Edit Add Members Saving the Zoning Database to a FileClick Insert Click OK Account name Password Admin authority Expiration Managing user accounts Creating user accounts Removing a user accountSelect an option from the Account Expiration Date area Click Add Account Changing a user account password Click Change Password User Account Administration dialog box Change Password Modifying a user account Click Modify Account Displaying switch informationClick Close Name Server data window Switch data windowEntry Description Link data window Port Statistics data window Configured Zonesets data windows Port Information data window Configuring port threshold alarms Port Threshold Alarm Configuration dialog box Paging a switch Exporting name server information to a file Setting the date/time and NTP client Resetting a switchConfiguring a switch Switch configuration is divided into areas Configuration wizard Switch properties Parameter Description In-band Management parameter Network Properties dialog box IP Configuration parameters Network properties Previously configured IP address Snmp trap configuration parameters Archiving a switch configuration Restoring a switch configuration Restore dialog boxes Full and Selective Restoring the factory default configuration Setting Value Installing firmware Downloading a support file Displaying hardware status Hardware status LEDs Displaying port information Port status State Description Port/transceiver states LIP ALPD,ALPS Port Information data window entries Configuring ports Port Properties dialog box Port States parameters Port Speed parameters Changing the port symbolic name Port Type parametersInteroperability Credits parameters Stream Guard parameters Extending port credits Designating donor ports Testing ports Resetting a portSelect Port Reset Port Click Start Test Port Loopback Test dialog box Starting HP StorageWorks Fabric View This section describes the following Exiting HP StorageWorks Fabric View Setting HP StorageWorks Fabric View preferences Changing the Default Fabric View File encryption keySetting the polling frequency Displaying graphs Removing graphsArranging graphs in the display Customizing graphs Default Graph Options dialog box Printing graphs Rescaling a selected graphSaving graph statistics to a file Select a graph Add a Fabric messages Fabrics File-Open, Save messagesMessage User action Network Properties dialog box messages Switch Properties dialog box messages Domain IDs must be in the same range Port Properties dialog box messages Faceplate display messages Deselect the donor ports, and then retry Load Firmware dialog box messages Port Loopback Test dialog box messages No device detected in selected port yet. Test Extended Credits wizard messages Zoning dialog box messages Zoning configuration to the fabric. This feature Restore Configuration dialog box messages Save Fabric View dialog box messages Trap Configuration dialog box messages Switch Manager 110 Command Line Interface Commands, Parameter Setting Account name Password Authority Admin Working with switch configurations Modifying a configuration Backing up a switch configuration Ftp ipaddress userimages password images ftp bin Monitoring commands Administrative commands Keystroke Effect Admin Admin commandOpens the admin session Alias command Admin session for all keywords except List and Members Config command Admin session for all keywords except Backup and List Edit configname #ftp symbolicname or ipaddress user images Create Support command Firmware Install command Date commandAdmin session, except to display the date Hardreset command Help command None History command Hotreset command Manages and installs switch firmware Image commandDisplays the list of image files that reside on the switch Wait for the unpack to complete Lip command Passwd commandChanges a user account’s password Reinitializes the specified loop port Ping command Ps commandIP address of the switch to query Following is an example of a successful Ping command Quit command Reset commandCloses the Telnet session You can also press Ctrl+D to close the Telnet session Config Configname Parameter Default setting Arbff Port threshold alarm configuration default settings Sets a variety of switch parameters Set commandAdmin for all keywords except Alarm, Beacon, and Pagebreak Config option Set Config command Admin and Config Edit Set Config port parameters Enabled only for ports connected to initiator devices. Set config threshold parameters See Set config threshold parameters on page 140. Following is an example of the SET Config Switch command 8q FC Switch Following is an example of the SET Config Threshold command Following is an example of the SET Config Zoning command Set Log CommandClears all log entries Display filter Admin, except for the Clear keyword Set Port commandSpecifies the port. Ports are numbered beginning with Set Setup command Value on the switch and the Snmp management server must Information if remote logging is enabled. The default is Following is an example of the Set Setup System command Show commandDisplays fabric, switch, and port operational information Displays chassis component status and temperature Displays list of current donor configuration for all portsDisplays the status of the active network interfaces Displays Link State database information Lipalpdalps Offline state. a loss of signal causes the switch to Following is an example of the Show Chassis command Displays switch operational informationDisplays all connected devices Following is an example of the Show Domains command Following is an example of the Show Fabric commandFollowing is an example of the Show NS local domain command Following is an example of the Show NS domainID command Following is an example of the Show NS portID command Following is an example of the Show Interface command Following is an example of the Show Port command LIPF8F7 Following is an example of the Show Switch command Following is an example of the Show Topology command Command Line Interface Show Config command Following is an example of the Show Version commandDisplays configuration parameters for the switch Displays alarm threshold parameters for the switch Following is an example of the Show Config Switch command Following is an example of the Show Config Threshold command Following is an example of the Show Config Zoning command Show Log command Following is an example of the Show Log Component command Following is an example of the Show Log Level commandFollowing is an example of the Show Log Options command Following is an example of the Show Log command Show Perf command Show Setup command Following is an example of the Show Perf commandFollowing is an example of the Show Perf Byte command Displays the current Snmp and system settings Displays manufacturing information about the switch Displays the current Snmp settingsDisplays the current system settings Following is an example of the Show Setup Mfg command Following is an example of the Show Setup System command Shutdown command Test command To run the online loopback test, enter the following command Uptime command User commandAdministers and displays user accounts Admin, except for the List option Following is an example of the User Accounts command Following is an example of the User Add command Whoami command Following is an example of the User Edit commandFollowing is an example of the User Delete command Following is an example of the User List command Zone Command Manages zones and zone membership on a switch Following is an example of the Zone List command Zoneset command Following is an example of the Zone Members commandFollowing is an example of the Zone Zonesets command Manages zone sets and component zones across the fabric Following is an example of the Zoneset Active command Zoning command Following is an example of the Zoneset List commandFollowing is an example of the Zoneset Zones command Opens a Zoning Edit session Limit Description Following is an example of the Zoning Limits command E2JBOD2 Following is an example of the Zoning List command Command Line Interface Index Index Index 186 System configuration change 148 display List definitions 179 Save edits Remove all Zoning command