Command Line Interface
wwn_c001b0
zone_set_1
wwn_401248
zone_set_1
wwn_02402f
zone_set_1
wwn_22412f
zone_set_1
The following is an example of the Zone Members command:
2/8q FC Switch #> zone members wwn_b0241f
Current List of Members for Zone: wwn_b0241f
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
21:00:00:e0:8b:02:41:2f
The following is an example of the Zone Zonesets command:
2/8q FC Switch #> zone zonesets zone1
Current List of ZoneSets for Zone: zone1
zone_set_1
Zoneset command
Manages zone sets and component zones across the fabric.
Authority
Admin and Zoning Edit. See the “Zoning command” on page 178 for information about starting a Zoning Edit session. The Active, List, and Zones keywords are available without an Admin session. You must close the Zoning Edit session before using the Activate and Deactivate keywords.
Syntx
ZONESET
Keywords
ACTIVATE [zone_set]
Activates the zone set given by [zone_set]. This keyword deactivates the active zone set. Close the Zoning Edit session before using this keyword.