HP 2/8q Fibre Channel manual Zoning command, Following is an example of the Zoneset List command

Command Line Interface

The following is an example of the Zoneset List command:

2/8q FC Switch #> zoneset list

Current List of ZoneSets

------------------------

alpha beta

The following is an example of the Zoneset Zones command:

2/8q FC Switch #> zoneset zones ssss

Current List of Zones for ZoneSet: ssss

----------------------------------

zone1

zone2

zone3

Zoning command

Opens a Zoning Edit session in which to create and manage zone sets and zones. See the “Zoning command” on page 178 and the “Zoneset command” on page 176.

Authority

Admin, except for the Active, History, Limits, and List keywords.

Syntax

ZONING

Keywords

ACTIVE

Displays information for the active zone set including component zones and zone members. This keyword does not require an Admin session.

CANCEL

Closes the current Zoning Edit session. Any unsaved changes are lost.

CLEAR

Clears all inactive zone sets from the volatile edit copy of the zoning database. This keyword does not affect the non-volatile zoning database. However, if you enter the Zoning Clear command followed by the Zoning Save command, the non-volatile zoning database is cleared from the switch.

Note: The preferred method for clearing the zoning database from the switch is the Reset Zoning command.

EDIT

Opens a Zoning Edit session.

178 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide