Switch Manager

Saving the Event Browser to a file

To save the Event Browser to a file:

Note: Filtered events are not saved.

1.Filter and sort the Event Browser to obtain the desired display.

2.Select File > Save As.

3.Select a folder and enter a file name in which to save the event log, and then click Save.

The file can be saved in XML, CSV, or text format. XML files can be opened with an internet browser or text editor. CSV files can be opened with Microsoft Excel or most spreadsheet applications.

Active Zoneset data window

The Active Zoneset data window displays the zone membership for the active zone set that resides on the fabric management switch.

To open the Active Zoneset data window, click the Active Zoneset tab below the data window in the topology display. See “Configured Zonesets data windows” on page 65 for information about the zone set definitions on a particular switch. See “Zoning a fabric” on page 45 for more information about zone sets and zones.

The Active Zoneset data window (Figure 15) uses display conventions for expanding and contracting entries that are similar to the fabric tree. An entry handle located to the left of an entry in the tree indicates that the entry can be expanded. Click this handle or double-click the following entries:

■A zone set entry expands to show its member zones.

■A zone entry expands to show its member port/devices.

■WWN and FC devices that are zoned, but no longer part of the fabric, are grayed-out.

Figure 15: Active Zoneset data window