HP 2/8q Fibre Channel manual Lip Alpd,Alps

Switch Manager

Table 23: Port Statistics data window entries (Continued)

Entry	Description
FBusy	Number of class 3 fabric busy (F_BSY) frames generated by this port
	in response to incoming frames. This usually indicates a busy condition
	on the fabric or N_port that is preventing delivery of this frame.
Flow Errors	Number of times a frame is received and all the switch ports receive
	buffers are full. The normal Fabric Login exchange of flow control
	credit should prevent this from occurring. The frame is discarded.
FReject	Number of frames, from devices, that have been rejected. Frames can
	be rejected for any of a large number of reasons.
Invalid CRC	Number of invalid Cyclic Redundancy Check (CRC) frames detected.
Invalid Destination	Number of address identifier (S_ID, D_ID) errors. AL_PA equals
Address	non-zero AL_PA found on F_Port.
Link Failures	Number of optical link failures detected by this port. A link failure is a
	loss of synchronization or by loss of signal while not in the offline
	state. A loss of signal causes the switch to attempt to re-establish the
	link. If the link is not re-established, a link failure is counted. A link
	reset is performed after a link failure.
LIP (AL_PD,AL_PS)	Number of F7, AL_PS LIPs, or AL_PD (vendor specific) resets
	performed.
LIP(f7,AL_PS)	Used to reinitialize the loop. An L_port, identified by AL_PS, may have
	noticed a performance degradation and is trying to restore the loop.
LIP(f7,f7)	A loop initialization primitive frame used to acquire an AL_PA.
LIP(f8,AL_PS)	Denotes a loop failure detected by the L_port identified by AL_PS.
Login Count	Number of device logins that have occurred on the switch.
Logout Count	Number of device logouts that have occurred on the switch.
Loop Timeouts	Number of loop timeouts.
Loss Of Sync	Number of synchronization losses (>100 ms) detected by this port. A
	loss of synchronization is detected by receipt of an invalid
	transmission word.
Primitive Sequence	Number of bad primitives received by the port.
Errors
Rx Link Resets	Number of link reset primitives received from an attached device.
Rx Offline Sequences	Number of offline sequence primitives received by the port.
Total Errors	Total number of primitive and non-primitive port link errors.
Total Link Resets	Number of link-reset primitives the transmitted by the port.
Total LIPs Received	Number of loop initialization primitive frames received.
Total LIPs Transmitted	Number of loop initialization primitive frames transmitted.
Tx Offline Sequences	Number of offline primitives transmitted by the port.
Total Rx Frames	Total number of frames received by the port.
Total Rx Words	Total number of words received by the port.
Total Tx Frames	Total number of frames transmitted by the port.
Total Tx Words	Total number of words transmitted by the port.
Tx Link Resets	Number of link reset primitives sent from this port to an attached port.
Total Offline	Total number of offline sequences transmitted and received by the
Sequences	port.

HP StorageWorks 2/8q Fibre Channel Switch Management User Guide 83