HP 2/8q Fibre Channel manual Domain IDs must be in the same range

Switch Manager

Table 31: Switch Properties dialog box messages (Continued)

Message	User action
Out of range domain ID specified.	Verify that all information is valid and retry the
	configuration change. Consult the
	documentation for valid configurations.
	Valid domain IDs must be in the range 1 to
	239, and must be unique within a fabric. If the
	fabric contains Switch with E_Port switches, all
	domain IDs must be in the same range of
	sixteen values: 1…16, 17…32, and so on.
Received error in attempting to edit switch	Verify that the data is valid, that the user has
configuration.	permissions to modify the configuration on the
or	switch, that the switch is reachable in the
Received error in attempting to save switch	fabric, and that the fabric is reachable from
configuration.	the user’s workstation, and then retry the
or	configuration change.
Received error in attempting to activate switch
configuration.
Reset will complete shortly. There is a brief loss	Wait for the switch to become reachable
of connectivity with switch.	again. This may take up to one minute.
The new domain ID specified is invalid.	Verify that all information is valid and retry the
Unable to apply invalid chassis/fabric ID	configuration change. Consult the
	documentation for valid configurations.
values
	Valid domain IDs must be in the range 1 to
	239, and must be unique within a fabric. If the
	fabric contains Switch with E_Port switches, all
	domain IDs must be in the same range of
	sixteen values: 1…16, 17…32, and so on.
Unable to apply changes. Failed to obtain	Verify that another user is not currently
admin privileges.	modifying the switch configuration, using
	either the management application, or a telnet
	login, or any application.
Unable to apply invalid timeout values.	Verify that all information is valid and retry the
or	configuration change. Consult the
Unable to apply invalid IP address.	documentation for valid configurations.
or	Valid domain IDs must be in the range 1 to
Unable to apply invalid trap address.
	239, and must be unique within a fabric. If the
or
	fabric contains Switch with E_Port switches, all
Unable to apply invalid subnet mask.
	domain IDs must be in the same range of
or
	sixteen values: 1…16, 17…32, and so on.
Unable to apply invalid gateway address.
or
Unable to apply invalid ARP timeout value.

100 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide