Manuals / HP / Computer Equipment / Printer

HP 9500mfp manual Acoustical specifications¹, Sound power level Declared per ISO

Models: 9500mfp

1 354

Download 354 pages 57.43 Kb

Page 335

Acoustical specifications¹

Sound power level	Declared per ISO 9296

Printing/copying (24 ppm)	LWAd = 7.3 Bels (A) [73 db (A)]
Ready	LWAd = 5.6 Bels (A) [56 db (A)]

Sound pressure level (bystander position)	Declared per ISO 9296

Printing/copying (24 ppm)	LpAm = 55 db (A)
Ready	LpAm = 37 db (A)

1.Values current as of March 24, 2004. Values subject to change. See www.hp.com/go/clj9500mfp for current information.

•Configuration tested: Copy/print simplex from 2,000-sheet side input tray (tray 4) to the 3,000-sheet stacker using A4-size media at 24 ppm monochrome file.

11

ENWW	Acoustical specifications¹ 319

Image 335

HP 9500mfp manual Acoustical specifications¹, Sound power level Declared per ISO

Contents

User guide Page HP Color LaserJet 9500mfp Trademark Credits Copyright and LicensePage Chapter MFP basics Digital sending and e-mail ContentsEnww Printing Control panel menus Managing and maintaining Service and support Specifications and regulatory information Enww Contents MFP components MFP componentsRev Enww Control panel Features and buttons Function Light State Indication Interpreting control-panel lightsTo specify other numeric values Light State Indication Control-panel home screen Setting the MFP defaults Setting the MFP defaultsSetting the MFP device defaults To set device defaults at the control panelLoading input trays Loading input trays To load media in trayRev To load tray 1 when the same paper is used for multiple jobs Rev Pull the tray open until it stops Loading tray 2 and trayTo load detectable standard-size media in tray 2 and tray Tray 2 and tray 3 hold up to 500 sheets of standard mediaRev Enww That tray To load undetectable standard-size media in trayTray SIZE=*SIZE menu is displayed Set the Custom/Standard switch to CustomGuide until it gently touches the paper Rev To load custom media in tray 2 and tray Rev Enww Rev To load the 2,000-sheet side input tray tray Rev Press the Menu button Changing and setting the media size and type for a trayTo set or change media size for tray Than ANYTo set or change a custom size for tray 2 and tray Touch Exit to exit the menu To set or change a media type for any trayMFP basics Copying Copy-screen layout Copy-screen layout Features and buttons FunctionPrevious screen Simplex/duplex, and staplingStarts copying the document Moves back one screen on the control-panel displayCopying instructions Copying instructionsSetting is Letter or A4 only if no media size is detected Copying by using the default settings one-touch copyingTo make color copies by using the default settings Copying by using user-defined settingsSelect 1-sided or 2-sided Job ModeBasic tab What to select Select Portrait or LandscapeDescription of use Sheet Copying OrderingSelect Collated or Uncollated Copying from the scanner glass Copying by using the ADFSelect Book as the size Touch OK Copying booksColor copies or black and white copies Creating a job to be copied laterEnhance the document Adjust the lightness/darknessReduce or enlarge Sharpness Background RemovalCopy setting Description Setting copy defaultsIndicates the sharpness of the image when it is copied Touch Sending Touch E-MAIL Network or e-mail administrator for this informationRev Sending documents Sending documentsColor Scan Preferences Select Black and White or Color Changing the settingsSending a document to multiple recipients Using the auto-complete function Added to the local address book Using the address bookUsing the address book Creating a recipient list Faxing Country/region support Support Guide Connecting the fax to a phone line Verifying the fax operation Verifying the fax operationName is a legal requirement Establishing the required fax settingsEstablishing the required fax settings Using the Fax Settings menuUtility to disable the LAN fax To verify or change the date and time settings Setting or verifying the date and timeSetting or verifying the location To verify or change the phone number and the company name Setting or verifying the fax headerTo verify or change the location Type a phone number and then touch OK Status message bar Fax feature screenConfiguration Utility Fax feature screenFrom memory Sending faxesSending a fax by typing the number manually Send a FAX under the list of help topicsSending faxes FaxSpeed-dial group, see To create a speed dial onpage Sending a fax by using speed dialThen deleted from memory Contact list Sending a fax by using phone book numbersRev Press the Menu button Touch FAX Canceling a faxCanceling the current fax transmission Canceling a faxTouch the FAX option Canceling all pending faxesSpeed dial To create a speed dialSpeed dial To delete a speed dialTouch the Edit tab Touch the Delete Speed Dial option Touch Delete Touch YES Touch OKTo change the sharpness setting Changing the sharpness settingTo change the background setting Changing the background settingReceiving faxes Changing the light/dark settingTo change the light/dark setting Establishing optional fax settings Establishing optional fax settingsOptions might not be available or configurable Use the following procedure to set the modem volume Setting the modem volumeTo set the modem volume Reduce the transmission time Setting the ringer volumeSetting outgoing fax resolution To set the ringer volumeTo set the outgoing fax resolution To set a dialing prefix Setting dialing and detection optionsSetting a dialing prefix Setting dialing and detection optionsTo set redial-on-busy Setting the redial-on-busy featureTo select the paper tray Setting the paper traySetting the paper tray To set the destination bin Setting the destination binSetting the destination bin Troubleshooting faxWhat type of phone line are you using? Are you using the phone cord that came with the MFP?Roll-over lines Are you using a phone-line splitter?Are you using a surge-protection device? Checking fax status Checking fax statusMFP fax feature or has enabled LAN fax. When Analog fax is installed and readyFax is installed and operational. However HP Digital Sending utility has either disabledFax feature is not operating Fax feature is not operatingProblem Cause Solution Fax is installed but the optionDoes not appear Formatter board is faultyService Graphics or Text and Graphics. See General fax problemsProblem Cause Recommended action Fax settings do not seem to be available in HP Web Jetadmin Middle of faxing ADF cover on Schedule printing of faxes doesReceiving fax problems Receiving fax problems Problem Cause Solution MFP is out of toner Faxes will not print until the lock is disabledWill be printed after the tray is refilled Schedule printing of faxes is setSending fax problems MFP is receiving faxes but is Disable the detect dial-tone setting seeSending fax problems Sent faxes are not arriving at the receiving fax machine 32-63 Transmit negotiation errors Error codesValue Description Connection enablement failure errors 16-31 Call establishment errorsValue Description 64-79 Data transmit errors80-111 Transmit termination errors 144-159 Receive data errors 112-143 Receive negotiate errors192-223 Undefined 224-255 160-191 Receive termination errorsFax product specifications Fax product specificationsEnvironmental specifications Fax specificationsRev Customizing tray 1 operation Printing from tray 1 when the loaded paper is requestedCustomizing tray 1 operation Manually feeding paper from tray For Windows all versions Using the job-storage featuresTo gain access to the job storage features Using the job-storage featuresTo print a private job Private jobsTo delete a private job Stored jobsTo delete a stored job To print a stored jobQuickCopy jobs To delete a QuickCopy job To print additional copies of a QuickCopy jobOption Proof and hold jobsTo delete a proof and hold job To print a proof and hold jobEnww Printing 121 Control panel menusTo navigate through the control-panel menus Retrieve job menu Retrieve job menuExplanation Jobs for that userUser Name Information menu MFP FeaturesInstalled mass storage devices Paper handling menu Paper handling menuAppear for tray 1 only Values ExplanationSubstitute the tray number for N Media sizes This message appears when the custom switch isWhere you select millimeters or inches as the unit Measure and set the X and Y dimensionsOriginals submenu Configure device menuConfigure device menu Describe the size of the original document. If media is not Use this item to specify the media size of the originalDocument MFP uses the media sensors to automaticallyWhose weight is more than 100 g/m² 26-lb bond Mixed is set as the default. You can select from nineIf Heavy Paper is set to ON, the scanner will adjust Area. The setting can impact output quality for mediaNot collated Copying submenuColor copies One side or both sides of the copyNumber of copies Produced when you press Start without selectingFactory default setting is Use this item to indicate the number of copies that areThat is attached Values varyDepending on =maximum sharpness Use this item to specify the sharpness settingEnhancement submenu =minimum sharpnessSending submenu Mail submenu Use this item to automatically search the network for Use this item to test the configured gateways for correctFunctionality. If the configured gateways are functional ImageNumber from 1 to 32,000. Use the numeric keypad to specify Printing submenuDefault Paper Size Letter That is installed Media size using the ruler labels in the traysSimplex of a sheet of paper Control-panel settingsHP LaserJet 4 Series printers This item also applies to A3- and 11 x 17 size mediaUse this item to select the version of Courier font to use Regular The internal Courier font that is available onSelect on to print the PS error page when PS errors occur Print quality submenu Media type that you want to use. For each of the following Position OFF. For more information about optimize values ON. The default value of each item is OFF. The RestoreOptimize option resets all options to the factory default AdjustmentsHard disk System setup submenuFactory default setting is Control panel menus Controls on the control-panel displayConnected to a network Monochrome mode. Auto switches between modes based onMost cost-effective option for switching modes Deleted from the queueOptions opens its own submenu Use this item to specify the behavior of the trays. EachMode Sleep mode. Sleep mode minimizes the amount of power thatMFP consumes when it is idle and reduces wear on the MFP Electronic components turns off the display backlightInterrupt Appears on the control panel Installed in the MFPIt receives specific software commands Possible values are determined by which valid languages areGoes offline for 10 seconds before returning online Determine how the MFP reacts to errorsTo stop printing when the MFP is out of staples, set Auto CONTINUE=OFF on the control-panel System setup menuPerformance might increase with this setting Use this item to determine how the MFP functions when a jamAuto The MFP automatically selects the best mode for jam Recovery usually ON. This is the default settingAppears. Touch the language that you want Available values include all languages in the list, and allSupported languages appear 159 Selecting high-quality mediaOrdering supported media Using non-HP-brand mediaSelecting and using media Setting media size and type Standard media size Custom media size Second Supported types of mediaRecycled High gloss images Color Tough paper 165 Recommended mediaOrdering recommended media HP Color Laser Paper HP Premium Cover Paper167 Recommended media Type Characteristics HP Color Laser PaperHP Soft Gloss Laser Paper Finish on both sides, 98 bright 105 g/m2 28-lb bondHP Premium Choice LaserJet PaperHP Office Recycled Paper Recommended media Type Characteristics HP Premium ChoiceHP LaserJet Paper Transparencies Recommended media Type Characteristics HP Tough PaperHP Color LaserJet Determining media type Weight Finish TypeMatte versus glossy Determining weightUp to 100 sheets Standard sizes 64 to 220 g/m2 Tray or bin Capacity Media WeightSupported media sizes for input and output DeviceTray or bin Capacity Media WeightTray or bin Capacity Media Long edge between 210 mm and 470 mm Up to Standard sizes for face-down binSheets Custom sizes face up177 Sheets stacked upTo 50 sheet 8K, 16K Stapled Standard sizes for face-up bin Finsiher179 Up to 2,000 sheets Standard sizes for face-down binInches x 8.25 inches maximum Mm x 470 mm 12 inches x 18.5 inchesSee Determining media type on Media-related copy-quality and print-quality issuesIssue Recommended action 181 Few more pages in order to remove the excess toner 183 Preprinted form melt under the temperature of the fuserSmeared toner Fan the media to separate the individual sheets Its maximum capacityLoading input trays on 185 Selecting and using media Managing supplies Using the MFP control panelManaging supplies Checking supplies levelsPress the Status button Ordering suppliesOrdering directly through the embedded Web server Storing the print cartridges Storing suppliesStoring the image transfer kit Storing the image drumsPrint cartridges Replacing and recycling the suppliesPrint cartridge Part number Replacing the print cartridges Rev Enww C8563A Using the image drumsImage drum Part number Black C8560A Cyan C8561A Yellow C8562AReplacing the image drums Open the door completely Enww Rev Enww Image transfer kit Replacing the image transfer kit Open the upper door on the right side of the MFP Enww Rev Slot Stops completelySwing the green lever up. Close all of the doors Transfer belt are pushed into the MFP completelyRev Enww Rev Roller. Slide the blue cover to the right Remove the bottom rollerRev Image cleaning kit Replacing the image cleaning kit Enww Rev Close the front doors Cleaner handle and the green lever are in the up positionReattach the finishing device Image fuser kit Replacing the image fuser kit Enww Rev Enww To clean the glass Cleaning proceduresCleaning the ADF Locate the white, vinyl ADF backing To clean the ADF delivery systemCleaning procedures Open the ADF Locate the top and bottom ADF glass stripsRev To clean the top ADF glass strip Close the ADF cover To clean the ADF rollers Rev Cleaning the post charger Rev Enww Cleaning the fuser input Enww Rev Relocating the MFP Relocating the MFPManaging and maintaining Clearing jams Clearing jamsClear up after a few pages are printed Jam clearing locations Problem solvingJam in the automatic document feeder ADF cover Jam in tray Clearing jams from the input-tray areasLoad media in tray Jam in tray 2 or tray Enww Rev Jam in the 2,000-sheet side input tray tray Rev Enww Jam inside the upper right door Enww Rev Jam at the upper right door or the front doors Open the front doors Lower the green lever Problem solving Enww Rev Enww Jam inside the duplexer Clearing jams from the duplexerEnww Rev Jam in the fuser area at the lower left door Clearing jams from the output areasRev Enww Jam in the top output bin Remove loose toner StepJam in the stacker or stapler/stacker Handle Carefully pull out any media from the flipper areaAvoid touching the flipper area. It can be hot Open doors. Push the finishing device back into place Jam in the 8-bin mailbox face-up bin Rev Jam in the multifunction finisher Rev Enww Rev Solving repeated jams Situation SolutionBe fed from tray Understanding MFP messages Using the MFP help systemUnderstanding MFP messages Submenu onIf a message persists Solving output-quality problems Solving output-quality problemsOutput-quality problem Short edge Output-quality troubleshooting procedures Output-quality-defect chart Solving persistent output-quality problemsVertical lines Repetitive defects Horizontal lines or streaksFingerprints and media dents Loose toner Color fade in all colors Color fade in one colorWhite areas dropouts on Smeared tonerSpecks or stray toner Media damage wrinkles, curl, creases, tearsMisaligned colors Skewed, stretched, or off-centerPrint Quality Troubleshooting Pages To print the Print Quality Troubleshooting Pages MFP hardware issues Solving MFP problemsSolving MFP problems Situation Solution Media-handling issues Situation Solution Network documentation that came with your MFP network cards OccurSituation Solution Situation Solution Make sure that no data extends into the unprintable area MFP-output issuesPrinted with Clipped marginsSituationSolution Job is not sent to the correct MFP Job prints withPrint a PS or PCL font list see Information menu on Be printed facing downSituationSolution Duplexer issues Situation Solution Warranty information Warranty informationService during and after the warranty period Extended warrantySpare parts and supplies availability Color print cartridge/image drum warrantyService and support Warranty information Ownership No Disassembly or DecryptionHP software license terms License GrantGovernment Restricted Rights TransferTermination Export RequirementsAbout on the Basics tab Information Specific to your products How to findCustomer support options worldwide Information from the MFPCustomer support options worldwide Customer support and MFP repair assistanceWorld Wide Web Mail Service and support HP Color LaserJet 9500mfp Physical specificationsPhysical specifications Specifications and regulatory information Enww Volt models Power requirements and circuit capacityPower consumption Power consumptionRev Sound pressure level bystander position Declared per ISO Acoustical specifications¹Sound power level Declared per ISO Acoustical specifications¹Storage humidity Storage temperatureOperating and storage environment Relative humidityProtecting the environment Environmental product stewardship programRecycling HP LaserJet PrintingSupplies Supplies ReturnsRecycled paper Rev Sheet Material safety dataFCC statement Declaration of Conformity Regulatory statementsSupplementary Information Conforms to the following Product SpecificationsEnww Canadian DOC Regulations EU Statement for Telecom OperationVcci Statement Japan Luokan 1 laserlaite Klass 1 Laser Apparat Korean EMI Statement Laser Statement for FinlandVaro VaroitusVarning Taiwan Class a Statement Taiwan Battery Statement Product Information Sheet Specifications and regulatory information Page C8549-90902