HP 9500mfp manual Interrupt

http://www.hp.com/go/clj9500mfp

Item Values Explanation

COPY/SEND SETTINGS	INACTIVITY
	TIMEOUT
	AUTO SETTINGS
	REST
	TIMEOUT AFTER
	SEND
	HOLD OFF PRINT
	JOB
	HOLD OFF TIME
	SCAN AHEAD
	AUTO JOB
	INTERRUPT
	INTERRUPT
	COPY JOB
	AUDIBLE FEEDBACK

•INACTIVITY TIMEOUT: The amount of time that the copy, send, or fax settings are kept before resetting to the defined settings. The value range, in seconds, is 10 to 300, and the default is 60.

•AUTO SETTINGS REST: This option resets the copy, send, and fax settings when the START button is pressed. The values are OFF and ON, and the default is OFF.

•TIMEOUT AFTER SEND: The amount of time that a send setting is kept before resetting to the factory (default) settings. The value range is 10 to 300, and the default is 10.

•HOLD OFF PRINT JOB: If the value is set to ON, the print job will be held while you are using the MFP control panel.

•HOLD OFF TIME: This value controls how long a print job is held off after the copy/send job is complete.

•SCAN AHEAD: A copy job can be scanned even if the MFP is printing another job. The job is scanned and held until it can be printed. If SCAN AHEAD=OFF, the job will not be scanned until the print job is completed.

•AUTO JOB INTERRUPT: A copy job can automatically interrupt any currently printing network print job in between the number of full copies printed. When this item is set to OFF, the copy job waits until the network print job is completed.

•INTERRUPT COPY JOB: Interrupt the current copy job to make a different copy. When you press the START button, the MFP presents a message that asks if you want to interrupt the current copy job. When set to OFF, the current copy job cannot be interrupted by another copy job.

•AUDIBLE FEEDBACK: Gives an audible indication when a key is pressed or when you touch an interactive area of the touch screen.

154 Chapter 6 – Control panel menus Rev. 1.0